English - 9 -

Volume Up / Down

• You can increase or decrease the volume by using
V+ / V- buttons.
• The volume level selected will remain set, even when
the receiver is turned off and on again, until you change
volume again.
• The audio volume adjustment for the receiver is
independent of the volume control on your TV set.
IMPORTANT: You should be careful that both volume
controls are kept within reasonable levels so that when
switching on, or when rst turning on your TV set, the
sound level is not too high.
On-Screen Information
• You can press button to display on-screen
information. Details of the station and current
programme will be displayed on the information
screen.
• Particularly; current event name, next event
name, and starting and ending time, duration bar,
programme mode, channel number and name will be
displayed on the information screen (if available).
Menu System

Viewing the Main Menu

• Press the MENU button to view main menu.
• You can move between menus by using the
navigation ( / / / ) buttons on the remote
control.
• You can enter, select or con rm a menu option by
using OK button.
• In some sub-menus, you can use BACK button to
return to a previous menu screen.
• To exit from a menu screen, you can press MENU
button.
• The following items are located in the main menu
screen:

Information Banner

• Information banner will be displayed at the bottom
of the menu screen in all menus.
• Available functions that can be used in the current
menu are displayed in the information banner.
Managing Stations: Channel List
• The set-top-box sorts all stored stations in the
Channel List.
• You can edit this channel list, set favourites or sort
channels by using the Channel List options.
• Press MENU button to view main menu. Select
Channel List item by using “ ”/“ button. Press
OK to view menu contents.
Note: You can direclty press OK button to view
channel list.

Selecting a Speci c Channel

• Select option should be highlighted by using “ ”/“
” button.
• To watch a speci c channel, you should highlight
the desired channel using “ ”/“ ” button and press OK
button. Selected channel will be displayed.