The control panel freezer
On /Off
Cooler ˚C
˚C
On /Off
Cooler/ ˚C Freezer
Quick
freeze Alarm off
˚CFreezer
F.Mains indicator light (green)
G.Button On/Off for the appliance
H.Temperature setting button (for warmer temperatures)
I.Temperature display
J.Temperature setting button (for colder temperatures)
K.Quick freeze function "on" indicator (yellow)
L.Quick freeze button
M.Alarm off reset light
N.Alarm off reset button
Temperature setting buttons
The temperature is adjusted using the “H“ and “J“ buttons. These buttons are connected to the temperature display.
The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the display of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons,“H” or “J“.
Each time one of the two buttons is pressed again the DESIRED temperature is adjusted by 1 °C.The DESIRED temperature must be reached within 24 hours.
If neither button is pressed, the temperature display automatically switches back after a short period (approx. 5 sec.) to the display of the ACTUAL temperature.
DESIRED temperature means:
The temperature that has been selected for inside the freezer. The DESIRED temperature is indicated by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the current temperature inside the freezer.The ACTUAL temperature is indicated with illuminated numbers.
Temperature display
The temperature display can indicate several pieces of information.
During normal operation, the temperature currently present in the freezer (ACTUAL temperature) is displayed.
When the temperature is being adjusted a flashing display indicates the freezer temperature currently set (DESIRED temperature).
Starting up - setting the temperature
Plug the mains plug into the mains socket.
Press ON/OFF button (G) for the functioning of the whole appliance. The green mains pilot indicator illuminates. The alarm light flashes until the temperature is reached.The buzzer sounds.
Pressing button “N” stops the buzzer.
Press either the H“ or “J” button. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.
Set the required temperature by pressing the “H“ or
“J“ buttons (see section "Temperature setting buttons"). The temperature display will immediately show the changed setting. Each time the button is pressed the temperature is adjusted by 1 °C.
From a food safety point of view
The alarm light goes off, when the set temperature is reached.
15
