Transition Networks M/GE-PSW-SX-01 Installation, Copper and fiber ports, Connect the fiber cable

Page 2

M/GE-PSW-xX-01

Installation

Copper and fiber ports

The illustration below shows the front panel of the M/GE-PSW-xX-01 media converters.

Installation -- Continued

Connect the fiber cable

Full duplex (always ON) is on the fiber side only; therefore, the 512-Bit Rule does not apply. The cable lengths are constrained by the cable requirement.

Front Panel

TP Link/Active

Fiber Link/Activity

TX RX

Fiber Port

Power ON LED

Copper Port

1.Locate or build IEEE 803.2™ compliant 1000Base-X fiber cable with male, two-stranded TX to RX connectors installed at both ends.

2.Connect the fiber cable to the M/GE-PSW-xX-01 media converters as follows:

Connect the male TX cable connector to the female TX port.

Connect the male RX cable connector to the female RX port.

3.Connect the fiber cable to the other device (another media converter, hub, etc.) as follows:

Connect the male TX cable connector to the female RX port.

Connect the male RX cable connector to the female TX port.

Electrostatic Discharge (ESD)

Always observe the following ESD precautions when installing or handing the M/GE-PSW-xX-01 media converter:

Do not remove the converter from its protective packaging until you are ready to install it.

Wear an ESD wrist grounding strap before handling any module or component. If you do not have a wrist strap, maintain grounded contact with the system unit

throughout any procedure requiring ESD protection.

Connect fiber cable

Connect fiber cable

to media converter

to other device

as shown.

(media converter,

 

hub, etc.) as shown

RX

RX

TX

TX

Note: With AutoCross permanently enabled, the link LED only lights when a valid end-to-end connection is made.

2

Tech Support: 1-800-260-1312 International: 00-1-952-941-7600 (24 hours)

techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.

3

Image 2
Contents User’s Guide Connect the fiber cable InstallationCopper and fiber ports Electrostatic Discharge ESDAC power Powering the media converterPower adapter DC powerStatus LEDs Product featuresOperation Half-Duplex flow control 512-Bit Rule Automatic link restorationFull-Duplex flow control Back pressureFiber cable Cable SpecificationsTechnical Specifications Copper cableTechnical Support TroubleshootingContact Us Transition Now Web-Based Seminars MailDeclaration of Conformity Declaration of ConformityCompliance Information CE Mark FCC RegulationsTrademark Notice Copyright Restrictions

M/GE-PSW-LX-01, M/GE-PSW-SX-01 specifications

Transition Networks has been a market leader in reliable connectivity solutions, particularly in the realm of media conversion. Among their offerings, the M/GE-PSW-SX-01 and M/GE-PSW-LX-01 models stand out for their robust features and capabilities. These devices help organizations transition data between different media types within their networks, facilitating seamless communication and ensuring high-speed data transfer.

The M/GE-PSW-SX-01 is designed for short-range applications. It employs a fiber-optic connection using multimode fiber optics, typically operating over a distance of up to 550 meters with a wavelength of 850 nm. This makes it an ideal choice for local area networks (LANs) where the equipment is in close proximity. Its compact design allows for easy deployment in various environments, and its plug-and-play functionality simplifies installation, requiring minimal technical knowledge.

On the other hand, the M/GE-PSW-LX-01 is tailored for long-range optical transmission using a single-mode fiber. It operates at a wavelength of 1310 nm and can cover distances up to 10 kilometers, making it suitable for wide-area network (WAN) applications. The long-range capability of the M/GE-PSW-LX-01 extends the reach of network infrastructure, allowing organizations to connect remote locations without compromising on speed or reliability.

Both models incorporate advanced technologies such as auto-negotiation and auto-MDI/MDI-X, which eliminate the need for manual configuration, ensuring that devices communicate efficiently regardless of their connection types. This user-friendly feature makes them particularly appealing for small to medium-sized enterprises that may not have dedicated IT support.

In terms of performance, both media converters support data rates of 10/100/1000 Mbps, allowing for high-speed transmission and minimal latency. They are built with durable materials to withstand varying environmental conditions, ensuring longevity and operational reliability.

The built-in LED indicators provide real-time monitoring of connection status and data traffic, enabling users to troubleshoot potential issues quickly. Overall, Transition Networks’ M/GE-PSW-SX-01 and M/GE-PSW-LX-01 represent compelling choices for organizations seeking to enhance their network infrastructure with reliable media conversion solutions. Their advanced features, long operational range, and simple setup make them invaluable in today’s fast-paced business environment, bridging the gap between various network media and technologies.