Transition Networks M/GE-PSW-SX-01 Cable Specifications, Technical Specifications, Fiber cable

Page 6

M/GE-PSW-xX-01

Cable Specifications

The physical characteristics must meet or exceed IEEE 802.3™ specifications.

Technical Specifications

For use with Transition Networks Model M/GE-PSW-xX-01 converters.

Fiber cable

Bit Error Rate:

single mode fiber (recommended): Multimode fiber (recommended): Multimode fiber (optional):

M/GE-PSW-SX-01 (SC)

Fiber Optic Transmitter Power:

Fiber Optic Receiver Sensitivity:

Link Budget:

M/GE-PSW-LX-01 (SC)

Fiber-optic Transmitter Power:

Fiber-optic Receiver Sensitivity:

Link Budget:

<10-9

9μm 62.5/125 μm

100/140, 85/140, 50/125 μm

850nm multimode

 

min: -10.0 dBm

max: -4.0 dBm

min: -17.0 dBm

max: -0.0 dBm

7.0 dB

 

1310 nm single mode

 

min: -9.5 dBm

max: -3.0 dBm

min: -20.0 dBm

max: -3.0 dBm

10.5 dB

 

Standards:

IEEE 802.3-2000

Data rate:

10 Mb/s, 100 Mb/s, 1000 Mb/s

Dimensions:

1.8"W x 3.35"D x 0.85"H (45.7 x 85.1 x 21.6 mm)

Weight:

3.15 oz. (127.5 g) approximately

MTBF*:

24,466 hours (MIL217F2 V5.0) (MIL-HDBD-217F)

 

100,130 hours (Bellcore7 V5.0)

Packet size:

Memory: 9256K bytes

MAC addresses:

8K

Maximum packet size:

1632 bytes, untagged

 

1628 bytes, tagged

Power sources:

Unit will accept - 5 to 28 VDC

 

Barrel connector - Wall Mount AC Adapter

 

(400mA at 12VDC)(The external power supply provided

The fiber optic transmitters on this device meet Class I Laser safety requirements per IEC-825/CDRH standards and comply with 21 CFR1040.10 and 21CFR1040.11.

Copper cable

Category 5 and Category 5e: minimum requirement

Gauge

24 to 22 AWG

Attenuation

22.0 dB /100m @ 100 MHz

Maximum Cable Distance

100 meters

Straight-through or crossover twisted-pair cable may be used.

Shielded (STP) or unshielded (UTP) twisted-pair cable may be used.

Pins 1&2 and 3&6 are the two active pairs in an Ethernet network.

All four pairs are used in a gigabit Ethernet network.

Use only dedicated wire pairs for the active pins:

(e.g., blue/white & white/blue, orange/white & white/orange, etc.)

• Do not use flat or silver satin wire.

 

with this product is UL listed by the power supply’s

 

manufacturer.)

 

Power consumption:

262mA @ 12VDC, 3.15 watts

Environment:

Tmra**:

0°C to 50°C (32°F to 122°F )

 

Storage Temp:

-25°C to 65°C (-13°F to 149°F)

 

Humidity:

5% to 95%, non-condensing

 

Altitude:

0 to 10,000 feet

Warranty:

Lifetime

 

*MTBF is estimated using the predictability method. This method is based on MIL- 217F at 25°C ambient temperature, typical enclosure heat rise of 10°C with nominal operating conditions and parameters. Installation and configuration specific MTBF estimates are available upon request. Contact Technical Support.

**Manufacturer’s rated ambient temperature.

Twisted Pair #1

Twisted Pair #2

Twisted Pair #1

Twisted Pair #2

Twisted Pair #3

Twisted Pair #4

S traight Through Cable

 

Cross over Cable

 

1

1

Twisted Pair #1

1

1

2

2

2

2

 

3

3

Twisted Pair #2

3

3

6

6

6

6

 

CAT5e Gigbit Ethernet

Straight-Through Cable

11

22

33

44

55

66

77

88

CAUTION: Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, RS422, RS485, DS1, DS3, Video Coax, etc., are intended to be connected to intra- building (inside plant) link segments that are not subject to lightening transients or power faults. Copper-based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, RS422, RS485, DS1, DS3, Video Coax, etc., are NOT to be connected to inter- building (outside plant) link segments that are subject to lightening transients or power faults. Failure to observe this caution could result in damage to equipment.

10

Tech Support: 1-800-260-1312 International: 00-1-952-941-7600 (24 hours)

techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.

11

Image 6
Contents User’s Guide Connect the fiber cable InstallationCopper and fiber ports Electrostatic Discharge ESDAC power Powering the media converterPower adapter DC powerProduct features OperationStatus LEDs Half-Duplex flow control 512-Bit Rule Automatic link restorationFull-Duplex flow control Back pressureFiber cable Cable SpecificationsTechnical Specifications Copper cableTechnical Support TroubleshootingContact Us Transition Now Web-Based Seminars MailDeclaration of Conformity Declaration of ConformityCompliance Information CE Mark FCC RegulationsTrademark Notice Copyright Restrictions

M/GE-PSW-LX-01, M/GE-PSW-SX-01 specifications

Transition Networks has been a market leader in reliable connectivity solutions, particularly in the realm of media conversion. Among their offerings, the M/GE-PSW-SX-01 and M/GE-PSW-LX-01 models stand out for their robust features and capabilities. These devices help organizations transition data between different media types within their networks, facilitating seamless communication and ensuring high-speed data transfer.

The M/GE-PSW-SX-01 is designed for short-range applications. It employs a fiber-optic connection using multimode fiber optics, typically operating over a distance of up to 550 meters with a wavelength of 850 nm. This makes it an ideal choice for local area networks (LANs) where the equipment is in close proximity. Its compact design allows for easy deployment in various environments, and its plug-and-play functionality simplifies installation, requiring minimal technical knowledge.

On the other hand, the M/GE-PSW-LX-01 is tailored for long-range optical transmission using a single-mode fiber. It operates at a wavelength of 1310 nm and can cover distances up to 10 kilometers, making it suitable for wide-area network (WAN) applications. The long-range capability of the M/GE-PSW-LX-01 extends the reach of network infrastructure, allowing organizations to connect remote locations without compromising on speed or reliability.

Both models incorporate advanced technologies such as auto-negotiation and auto-MDI/MDI-X, which eliminate the need for manual configuration, ensuring that devices communicate efficiently regardless of their connection types. This user-friendly feature makes them particularly appealing for small to medium-sized enterprises that may not have dedicated IT support.

In terms of performance, both media converters support data rates of 10/100/1000 Mbps, allowing for high-speed transmission and minimal latency. They are built with durable materials to withstand varying environmental conditions, ensuring longevity and operational reliability.

The built-in LED indicators provide real-time monitoring of connection status and data traffic, enabling users to troubleshoot potential issues quickly. Overall, Transition Networks’ M/GE-PSW-SX-01 and M/GE-PSW-LX-01 represent compelling choices for organizations seeking to enhance their network infrastructure with reliable media conversion solutions. Their advanced features, long operational range, and simple setup make them invaluable in today’s fast-paced business environment, bridging the gap between various network media and technologies.