Transition Networks M/GE-PSW-LX-01, M/GE-PSW-SX-01 Troubleshooting, Contact Us, Technical Support

Page 7

M/GE-PSW-xX-01

Technical Specifications -- Continued

Copper-based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, RS422, RS485, DS1, DS3, Video Coax, etc., are intended to be connected to intra-building (inside plant) link segments that are not subject to lightening transients or power faults. Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, RS422, RS485, DS1, DS3, Video Coax, etc., are NOT to be connected to inter- building (outside plant) link segments that are subject to lightening transients or power faults.

The product is certified by the manufacturer to comply with DHHS Rule 21/CFR, Subchapter J applicable at the date of manufacture.

WARNING: Visible and invisible laser radiation when open. Do not stare into the beam or view directly with optical instruments. Failure to observe this warning could result in an eye injury or blindness.

WARNING: Use of controls, adjustments, or the performance of procedures other than those specified herein could result in hazardous radiation exposure.

The information in this user’s guide is subject to change. For the most up-to-date information, view the user’s guide on-line at: www.transition.com.

Troubleshooting

If the media converter fails, isolate and correct the failure by determining the answers to the following questions and then taking the indicated action:

1.Is the power LED illuminated and did the TX and FX LEDs turn ON then turn OFF?

NO

Is the power adapter the proper type of voltage and cycle frequency for the AC outlet?

Is the power adapter properly installed in the media converter and in the outlet?

Contact Technical Support: US/Canada: 1-800-260-1312, International: 00-1-952-941-7600.

YES

Proceed to step 2.

Note the following:

As a link pass-through device both copper and fiber cables must be installed before the LEDs will light.

2.Are the “TX and FX-Link/ACT” LEDs illuminated on the RJ-45 port ?

NO

Check the copper cables for proper connection.

Check the fiber cables for proper connection.

Contact Technical Support: US/Canada: 1-800-260-1312, International: 00-1-952-941-7600.

YES

Contact Technical Support: US/Canada: 1-800-260-1312, International: 00-1-952-941-7600.

Contact Us

Technical Support

Technical support is available 24 hours a day.

US and Canada: 1-800-260-1312

International: 00-1-952-941-7600

Transition Now

Chat live via the Web with Transition Networks Technical Support. Log onto www.transition.com and click the Transition Now link.

Web-Based Seminars

Transition Networks provides seminars via live web-based training. Log onto www.transition.com and click the Learning Center link.

E-Mail

Ask a question anytime by sending an e-mail to our technical support staff. techsupport@transition.com

Address Transition Networks 10900 Red Circle Drive Minnetonka MN 55343, U.S.A.

telephone: 952-941-7600

toll free:800-526-9267

fax:952-941-2322

12

Tech Support: 1-800-260-1312 International: 00-1-952-941-7600 (24 hours)

techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.

13

Image 7
Contents User’s Guide Electrostatic Discharge ESD InstallationCopper and fiber ports Connect the fiber cableDC power Powering the media converterPower adapter AC powerOperation Product featuresStatus LEDs Back pressure Automatic link restorationFull-Duplex flow control Half-Duplex flow control 512-Bit RuleCopper cable Cable SpecificationsTechnical Specifications Fiber cableTransition Now Web-Based Seminars Mail TroubleshootingContact Us Technical SupportCE Mark FCC Regulations Declaration of ConformityCompliance Information Declaration of ConformityCopyright Restrictions Trademark Notice

M/GE-PSW-LX-01, M/GE-PSW-SX-01 specifications

Transition Networks has been a market leader in reliable connectivity solutions, particularly in the realm of media conversion. Among their offerings, the M/GE-PSW-SX-01 and M/GE-PSW-LX-01 models stand out for their robust features and capabilities. These devices help organizations transition data between different media types within their networks, facilitating seamless communication and ensuring high-speed data transfer.

The M/GE-PSW-SX-01 is designed for short-range applications. It employs a fiber-optic connection using multimode fiber optics, typically operating over a distance of up to 550 meters with a wavelength of 850 nm. This makes it an ideal choice for local area networks (LANs) where the equipment is in close proximity. Its compact design allows for easy deployment in various environments, and its plug-and-play functionality simplifies installation, requiring minimal technical knowledge.

On the other hand, the M/GE-PSW-LX-01 is tailored for long-range optical transmission using a single-mode fiber. It operates at a wavelength of 1310 nm and can cover distances up to 10 kilometers, making it suitable for wide-area network (WAN) applications. The long-range capability of the M/GE-PSW-LX-01 extends the reach of network infrastructure, allowing organizations to connect remote locations without compromising on speed or reliability.

Both models incorporate advanced technologies such as auto-negotiation and auto-MDI/MDI-X, which eliminate the need for manual configuration, ensuring that devices communicate efficiently regardless of their connection types. This user-friendly feature makes them particularly appealing for small to medium-sized enterprises that may not have dedicated IT support.

In terms of performance, both media converters support data rates of 10/100/1000 Mbps, allowing for high-speed transmission and minimal latency. They are built with durable materials to withstand varying environmental conditions, ensuring longevity and operational reliability.

The built-in LED indicators provide real-time monitoring of connection status and data traffic, enabling users to troubleshoot potential issues quickly. Overall, Transition Networks’ M/GE-PSW-SX-01 and M/GE-PSW-LX-01 represent compelling choices for organizations seeking to enhance their network infrastructure with reliable media conversion solutions. Their advanced features, long operational range, and simple setup make them invaluable in today’s fast-paced business environment, bridging the gap between various network media and technologies.