Transition Networks MIL-SM2401MAF manual PoE Status

Page 99

Transition Networks

MIL-SM2401MAF

￿UPS information: The information will be available when the UPS is connected to the switch and the connection is normal and UPS is powered on.

￿Click

Refresh

button to refresh.

￿Input Voltage: Displays the current value, minimum, and maximum value of UPS input voltage.

￿Output Voltage: Displays the current value, minimum, and maximum value of UPS output voltage.

￿Frequency: Display the frequency value of UPS.

￿Battery Capacity: Displays the battery capacity of UPS.

￿UPS Overload: Displays the overload capacity of UPS.

￿Temperature: Displays the current temperature of UPS.

￿RatVoltage: Displays Range of the UPS voltage.

￿RatBtyVoltage: Displays Range of the UPS battery voltage.

￿RatCurrent: Displays Range of the UPS current.

￿RatFrequency: Displays Range of the UPS frequency.

￿Model: Model name of the UPS.

￿Version: UPS internal software version.

The figure represents the UPS status, when the status has been detected; the figure color will change from yellow to red and the status description will change, too.

PoE Status

View PoE port information and set configuration to each port.

24-Hour Technical Support: 1-800-260-1312

International: 00-1-952-941-7600

93

Page 98 Page 100
Image 99
Page 98 Page 100
Contents User Guide CE Mark Warning FCC WarningContents WEB-BASED Management Hour Technical Support International Iii 100 Appendix103 Introduction FeaturesSoftware Features ManagementSnmp MIB Vlan Dhcp IgmpSmtp SntpPackage Contents Front Panel Physical DimensionStatus Description LED IndicatorsPower LEDFDX/COL 25 Power ForwardingFDX LNK/ACT 25 Port /Giga portDesktop Installation Rear PanelAttaching Rubber Pads Power On Rack-mounted InstallationSmall Workgroup Network ApplicationSegment workgroup DC Power Input Login in the Console Interface Connecting to the SwitchUser Exec Commands LevelModes Access Prompt Exit Method About This Mode CLI ManagementExec System Commands Set Commands Set ListMemeory DefaultPassword Ip addressVersion AccountingSystem-info AddressPort Commands Set FastEthernet 1/2 Flowcontrol onSecurity on State disable Priority on highBandwidth Show bandwidth ConfigurationShow interface StatusTrunk Commands Set Vlan Commands Set Tag V2 addV2 delete V2 vlanid 2 portVlan Tagged VlanidrangeVlan ID Protocol v2 addIngressfilter1 off Protocol v2 deleteVlan protocol PvidSpanning Tree Commands Set Spanning-treeSpanning-tree on Seconds Priority numberPriority Max-ageHello-time FastEthernet 0/2Stp-path-cost Stp-path-priority Forward-timeForward-time Stp-path-priorityQOS Commands Set Fcfs Bridge-delay-bouQos queuepolicy Wrr hi 7 lowIgmp on Igmp Commands SetIgmp-query enable BoundMac / Filter Table Commands Set Ble Ble staticStatic FilterSnmp Commands Set Port Mirroring Commands Set 802.1x Commands Set Nasid test1 SharekeyServerport AccountportMaxrequest SupptimeoutServertimeout TxperiodCopy Tftp Commands SetFlashconfig.text AcceptTftp IP UPS Commands SetTftpconfig.text FlashSetpm on PoE Commands SetInfo Test10System log Commands Set Sntp Commands Set System Login About Web-based ManagementPreparing for Web Management Port status Port Status interface Hour Technical Support International View the Port Information Port StatisticsAdministrator Switch Setting IP AddressBasic Advanced Button to complete the configuration Misc Configuration 801.1p PriorityCollisions Retry Forever Console Port Information Port Controls Trunking Aggregator settingButton to add the port which is Aggregator Information Aggregator State Activity Igmp Snooping Forwarding and FilteringStatic MAC Address MAC filtering Port-based Vlan Vlan configurationTo create a new Vlan group VLAN-PortBase Add interface 802.1Q Vlan 802.1q Vlan interface Basic Will see the page as below Acceptable Frame type Spanning Tree System Configuration Per Port Configuration Button Port Mirroring Prot Mirroring interface Snmp Management Community strings Serve as passwordTrap Manager Security ManagerSntp Configuration Misc Config 802.1X ConfigurationPer port Configuration System Log To refresh the events log Save Configuration Tftp Update FirmwareTftp Restore Configuration Configuration BackupFactory Default Tftp Backup ConfigurationDefault IP address Default Gateway Subnet mask Power Status System RebootPoE Status PoE Status Interface MIL-SM2401MAF Faulty or loose cables Incorrect connectionsNon-standard cables Improper Network Topologies Diagnosing LED IndicatorsDiagnosing PoE problems No Power ForwardMDI-X Pin Signal / NameVCC- 1 1 VCC VCC- 2 2VCC VCC+ 3 3VCC+ VCC+ 6 6VCC+ LED Indicators ConnectorStandard Remote power RS-232 connectorSwitch architecture DimensionsSafety VentilationEMI DTE Pin # Console Port Pin AssignmentsPC DB9 DB9 DTERJ-45 Pin Assignments Pin Number Cable Types and Specifications Max. Length ConnectorCables 100BASE-TX/10BASE-T Pin AssignmentsGigabit Copper/SFP mini-GBIC combo port Pin MDI-X Signal Name MDI Signal Name
Related manuals
Manual 178 pages 19.96 Kb

MIL-SM2401MAF specifications

The Transition Networks MIL-SM2401MAF is a robust, military-grade Ethernet media converter designed to facilitate seamless communication within demanding environments. This media converter is specifically engineered to support the transmission of Ethernet data over long distances while ensuring reliability and performance in challenging conditions.

One of the standout features of the MIL-SM2401MAF is its dual-port configuration, which includes both a 10/100/1000Base-T port and a 1000Base-X SFP (Small Form-factor Pluggable) slot. This design allows users to connect various network devices, such as switches, routers, or servers, over copper or fiber connections. The flexibility of using an SFP slot ensures compatibility with different types of fiber media, catering to a broad range of networking needs.

The MIL-SM2401MAF supports extended ranges for data transmission, significantly surpassing the limitations of traditional Ethernet connections. With the ability to operate over multimode fiber up to 550 meters and single-mode fiber up to 10 kilometers, this device is ideal for long-haul communication within military applications and other critical infrastructure setups.

Another notable characteristic of the MIL-SM2401MAF is its compliance with military standards, ensuring durability and resilience in harsh environments. It is designed to withstand extreme temperatures, electromagnetic interference, and vibration, making it suitable for deployment in field operations or industrial settings. The device is also compliant with MIL-STD-810, which includes rigorous testing for environmental conditions.

In terms of power, the MIL-SM2401MAF offers flexible options, designed to accommodate various power sourcing needs. It can operate on a wide voltage range, enhancing its applicability in different situations while also including features for power redundancy.

Advanced features such as link fault pass-through, auto-negotiation, and automatic cable detection further enhance its reliability and ease of use. The simple plug-and-play operation means users can quickly integrate it into existing network infrastructure without needing extensive setup or configuration.

In summary, Transition Networks' MIL-SM2401MAF Ethernet media converter stands out as a versatile, high-performance solution suitable for military and industrial applications. Its combination of dual-port functionality, extended range capabilities, military-grade construction, and advanced operational features make it an invaluable tool for ensuring reliable communication in even the most challenging environments.
Top Page Image Contents