Transition Networks MIL-SM2401MAF manual Button to add the port which is

Transition Networks MIL-SM2401MAF

￿Group ID: There are four trunk groups to be selected. Choose the "Group ID" and

click

Select

button.

￿LACP: When enabled, the trunk group is using LACP. A port which joins an LACP trunk group has to make an agreement with its member ports first. When disabled, the trunk group is a static trunk group. The advantage of having the LACP disabled is that a port joins the trunk group without any handshaking with its member ports. But member ports won’t know that they should be aggregated together to form a logic trunk group.

￿Work ports: This column field allows the user to type in the total number of active port up to four. With LACP trunk group, you create a trunk group by connecting two or more switches (e.g. you assign four ports to be the members of the trunk group whose work ports column field is set as two). The exceed ports are standby (the Aggregator Information tab will show standby status on the exceed ports) and can be aggregated if work ports fail. If it is a static trunk group, the number of work ports must equal the total number of group member ports.

￿Select the ports to join the trunk group. The system allows four ports maximum to

be aggregated in a trunk group. Click

Add button to add the port which is

focused to the left field. To remove unwanted ports, select the port and click

Remove button.

￿When LACP enabled, you can configure LACP Active/Passive status for each port on State Activity page.

￿	Click	Apply	button.
￿	Use	Delete	button to delete Trunk Group. Select the Group ID and click
	button.

Delete

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

62