Transition Networks CPSMC0810-100, CPSMC0800-100 manual Replacing the Management Modules

Page 11

CPSMC08xx-100 PointSystem™ Chassis

2.2.3Replacing the Management Modules

CAUTION: Wear a grounding device and observe electrostatic discharge precautions when replacing media converter slide-in-module(s). Failure to observe this caution could result in damage to, and subsequent failure of, the management module(s).

NOTE: The management modules can be replaced while the chassis remains powered. However, you must configure a new IP address for the replacement management module. For more information, see the FocalPoint™ 2.0 user’s guide on the enclosed application CD or on-line at www.transition.com.

To replace a management module in the CPSMC08xx-100 chassis:

1.Remove the management module to be replaced by loosening the panel fastener screw that secures the module to the chassis front. Slide the module from the chassis.

2.Align the replacement module with the installation slot so that the panel fastener screw to the left of the module..

 

 

 

Input Power:

 

 

 

110-240 VAC

 

 

 

1.6A max. (60W max)

 

 

 

50/60 Hz

 

 

RESET

DB-9

PWR

LNK

CPSMC-0800

TX

RX

 

8-Slot Chassis

Panel Fastener Screw

3.Carefully slide the replacement management module into the installation slot, while aligning the module’s circuit board with the installation guides.

NOTE: Ensure that the management module is firmly seated inside the chassis.

4.Push in and rotate the attached panel fastener screw clockwise to secure the management module to the chassis.

slide-in-modules

24 hour Technical Support: 1-800-260-1312-- International: 00-1-952-941-7600

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Revision B CPSMC08xx-100 PointSystem Chassis Compliance InformationTable of Contents Description IntroductionIntroduction Unpacking the CPSMC08xx-100 EquipmentSlide-in-modules Calculating the Power ConsumptionSlide-in-Modules Media Converter Slide-in-Modules Chassis Face PlatesCFETF110 Installing the Media Converter Slide-in-ModulesReplacing the Media Converter Slide-in-Modules Modules Management ModulesSlide-in Three Types of Management Modules1a. CPSMM-200 Dual-Slot Master Management Module Installing the Management ModulesReplacing the Management Modules Power supply Powering the CPSMC08xx-100Primary Power Supply 3.1.1 AC Power Supply DC Power Supply Instant Fail Over Protection Auxiliary Power SupplyAC Auxiliary Power Supply AC and DC Power SuppliesDC Auxiliary Power Supply CPSMC08xx-100 Chassis Installing the CPSMC08xx-100 ChassisTable-Top Installation Standard 19-inch Rack InstallationChassis Grounding Lugs Cascade Option Chassis Operation Connecting the Slide-in-Modules to the NetworkNetwork mgmt Network ManagementHardware Connections RJ-45 Ethernet Port CPSMC08xx-100 PointSystem Chassis DB-9 Serial PortYES TroubleshootingAC Power Supply Technical SpecificationsRJ-45 Cable Cable SpecificationsNull Modem Cable Cable Shield Grounding Coax CableAddress Contact UsTechnical Support Transition Now Web-Based Seminars MailLimited Lifetime Warranty WarrantyCPSMC08xx-100 PointSystem Chassis
Related manuals
Manual 26 pages 56.08 Kb

CPSMC0810-100, CPSMC0800-100 specifications

Transition Networks CPSMC0800-100 is a versatile and robust media converter designed to enhance network connectivity in industrial environments. This device is particularly well-suited for users looking to improve the performance and reliability of their communication systems. With its ability to convert between different media types, the CPSMC0800-100 presents a myriad of applications for enterprise networks, security systems, and other critical infrastructures.

One of the standout features of the CPSMC0800-100 is its support for multiple media types. It seamlessly converts Ethernet signals between copper and fiber optics, allowing for flexible integration with existing network infrastructures. This capability is essential for organizations looking to extend their network reach, especially over long distances, without compromising on signal integrity.

The CPSMC0800-100 operates at speeds of up to 1 Gbps, making it suitable for high-performance applications. This speed is complemented by its low latency, ensuring that data is transmitted quickly and reliably. This is particularly important in environments where real-time data transmission is crucial, such as surveillance systems and industrial control networks.

Another key characteristic of this media converter is its robust design, optimized for harsh environmental conditions. With an extended temperature range, the CPSMC0800-100 can operate in temperatures ranging from -40°C to 75°C. This durability ensures that the device can function effectively in various settings, including factories, outdoor installations, and remote locations.

The CPSMC0800-100 is also equipped with advanced features such as IEEE 802.3az Energy Efficient Ethernet support. This technology helps lower power consumption, which is a significant consideration for organizations looking to reduce operational costs while maintaining network performance. Additionally, it has built-in LEDs for monitoring link activity and power status, enabling easy troubleshooting and maintenance.

Installation and configuration of the CPSMC0800-100 are made simple through its compact design and plug-and-play functionality. The device can be easily mounted in various locations, ensuring that deployment is quick and hassle-free. Overall, Transition Networks' CPSMC0800-100 media converter stands out as a reliable and effective solution for organizations aiming to enhance their network infrastructure with flexibility, speed, and durability. Whether for expanding existing networks or adapting to new technologies, this media converter is a valuable asset in modern communications.
Top Page Image Contents