Transition Networks CPSMC0810-100, CPSMC0800-100 manual DC Auxiliary Power Supply

Page 15

CPSMC08xx-100 PointSystem™ Chassis

3.2.2DC Auxiliary Power Supply

•This product is intended to be used in a restricted access location. Proper earthing (grounding) is required to ensure safe operation. Grounding terminals are provided (section 4.1.3) for proper grounding of the device as per customer installation requirements and local electrical codes. Prior to installation, use a voltmeter/ohmmeter to check the wiring for the presence of earth ground.

•A readily accessible disconnect device as part of the building installation shall be incorporated into the fixed wiring. The disconnect device (a 48 VDC, 15 or 20A circuit breaker or switch) must be included in the ungrounded supply conductor. Overcurrent protection must be a 48 VDC, 15 or 20A fuse or circuit breaker.

Read and follow all warning notices & instructions marked on the product or included in the manual.

CAUTION: All installation and service must be performed by qualified service personnel.

To power the CPSMC08xx-100 chassis through the DC auxiliary power supply:

1.Connect the female end of the external power converter to the auxiliary power inlet on the back of the chassis.

2.Connect the +48-VDC terminal to the connector marked “+”. Turn the terminal screw clockwise to secure.

3.Connect the -48-VDC terminal to the connector marked “-”. Turn the terminal screw clockwise to secure.

4.Connect the ground terminal to the connector marked “chassis ground”. Turn the terminal screw clockwise to secure.

5.Verify that Auxiliary power supply is connected properly by disconnecting the primary power supply, and then by observing the illuminated power LEDs on the installed slide-in-modules and by the chassis’ fan operation.

Auxiliary Power Inlet

External Power

Converter

power supply

GND – +

24 hour Technical Support: 1-800-260-1312-- International: 00-1-952-941-7600

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Revision B CPSMC08xx-100 PointSystem Chassis Compliance InformationTable of Contents Description IntroductionIntroduction Unpacking the CPSMC08xx-100 EquipmentSlide-in-modules Calculating the Power ConsumptionSlide-in-Modules Media Converter Slide-in-Modules Chassis Face PlatesCFETF110 Installing the Media Converter Slide-in-ModulesReplacing the Media Converter Slide-in-Modules Modules Management ModulesSlide-in Three Types of Management Modules1a. CPSMM-200 Dual-Slot Master Management Module Installing the Management ModulesReplacing the Management Modules Powering the CPSMC08xx-100 Primary Power Supply 3.1.1 AC Power SupplyPower supply DC Power Supply Instant Fail Over Protection Auxiliary Power SupplyAC Auxiliary Power Supply AC and DC Power SuppliesDC Auxiliary Power Supply CPSMC08xx-100 Chassis Installing the CPSMC08xx-100 ChassisTable-Top Installation Standard 19-inch Rack InstallationChassis Grounding Lugs Cascade Option Chassis Operation Connecting the Slide-in-Modules to the NetworkNetwork Management Hardware ConnectionsNetwork mgmt RJ-45 Ethernet Port CPSMC08xx-100 PointSystem Chassis DB-9 Serial PortYES TroubleshootingAC Power Supply Technical SpecificationsCable Specifications Null Modem CableRJ-45 Cable Cable Shield Grounding Coax CableAddress Contact UsTechnical Support Transition Now Web-Based Seminars MailLimited Lifetime Warranty WarrantyCPSMC08xx-100 PointSystem Chassis
Related manuals
Manual 26 pages 56.08 Kb

CPSMC0810-100, CPSMC0800-100 specifications

Transition Networks CPSMC0800-100 is a versatile and robust media converter designed to enhance network connectivity in industrial environments. This device is particularly well-suited for users looking to improve the performance and reliability of their communication systems. With its ability to convert between different media types, the CPSMC0800-100 presents a myriad of applications for enterprise networks, security systems, and other critical infrastructures.

One of the standout features of the CPSMC0800-100 is its support for multiple media types. It seamlessly converts Ethernet signals between copper and fiber optics, allowing for flexible integration with existing network infrastructures. This capability is essential for organizations looking to extend their network reach, especially over long distances, without compromising on signal integrity.

The CPSMC0800-100 operates at speeds of up to 1 Gbps, making it suitable for high-performance applications. This speed is complemented by its low latency, ensuring that data is transmitted quickly and reliably. This is particularly important in environments where real-time data transmission is crucial, such as surveillance systems and industrial control networks.

Another key characteristic of this media converter is its robust design, optimized for harsh environmental conditions. With an extended temperature range, the CPSMC0800-100 can operate in temperatures ranging from -40°C to 75°C. This durability ensures that the device can function effectively in various settings, including factories, outdoor installations, and remote locations.

The CPSMC0800-100 is also equipped with advanced features such as IEEE 802.3az Energy Efficient Ethernet support. This technology helps lower power consumption, which is a significant consideration for organizations looking to reduce operational costs while maintaining network performance. Additionally, it has built-in LEDs for monitoring link activity and power status, enabling easy troubleshooting and maintenance.

Installation and configuration of the CPSMC0800-100 are made simple through its compact design and plug-and-play functionality. The device can be easily mounted in various locations, ensuring that deployment is quick and hassle-free. Overall, Transition Networks' CPSMC0800-100 media converter stands out as a reliable and effective solution for organizations aiming to enhance their network infrastructure with flexibility, speed, and durability. Whether for expanding existing networks or adapting to new technologies, this media converter is a valuable asset in modern communications.
Top Page Image Contents