Transition Networks CPSMC0800-100, CPSMC0810-100 manual Chassis

Page 20

CPSMC08xx-100 PointSystem™ Chassis

To cascade two or more CPSMC08xx-100 chassis:

1.Locate one (1) Transition Networks management module cascade cable (with RJ-45 connectors installed at both ends) (P/N 6026) for each set of two (2) chassis to be cascaded.

NOTE: Transition Networks management module cascade cables are one (1) meter long. Ensure that the chassis are installed within one (1) meter of each other.

2.At the first chassis in the series: Plug the RJ-45 connector at one end of the cascade cable into the management module’s RJ-45 port labeled “OUT”.

3.At the next chassis in the series: Plug the RJ-45 connector at the other end of the cascade cable into the management module’s RJ-45 port labeled “IN”.

4.At the same chassis as in step 3: Plug the RJ-45 connector at one end of the cascade cable into the management module’s RJ-45 port labeled “OUT”.

5.At the next chassis in the series: Plug the RJ-45 connector at the other end of the cascade cable into the management module’s RJ-45 port labeled “IN”.

6.Repeat steps 4 and 5 until all chassis have been connected.

chassis

24 hour Technical Support: 1-800-260-1312-- International: 00-1-952-941-7600

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Revision B Compliance Information CPSMC08xx-100 PointSystem ChassisTable of Contents Introduction DescriptionUnpacking the CPSMC08xx-100 Equipment IntroductionCalculating the Power Consumption Slide-in-ModulesMedia Converter Slide-in-Modules Chassis Face Plates Slide-in-modulesInstalling the Media Converter Slide-in-Modules CFETF110Replacing the Media Converter Slide-in-Modules Management Modules Slide-inThree Types of Management Modules ModulesInstalling the Management Modules 1a. CPSMM-200 Dual-Slot Master Management ModuleReplacing the Management Modules Power supply Powering the CPSMC08xx-100Primary Power Supply 3.1.1 AC Power Supply DC Power Supply Auxiliary Power Supply AC Auxiliary Power SupplyAC and DC Power Supplies Instant Fail Over ProtectionDC Auxiliary Power Supply Installing the CPSMC08xx-100 Chassis Table-Top InstallationStandard 19-inch Rack Installation CPSMC08xx-100 ChassisChassis Grounding Lugs Cascade Option Chassis Connecting the Slide-in-Modules to the Network OperationNetwork mgmt Network ManagementHardware Connections CPSMC08xx-100 PointSystem Chassis DB-9 Serial Port RJ-45 Ethernet PortTroubleshooting YESTechnical Specifications AC Power SupplyRJ-45 Cable Cable SpecificationsNull Modem Cable Coax Cable Cable Shield GroundingContact Us Technical SupportTransition Now Web-Based Seminars Mail AddressWarranty Limited Lifetime WarrantyCPSMC08xx-100 PointSystem Chassis
Related manuals
Manual 26 pages 56.08 Kb

CPSMC0810-100, CPSMC0800-100 specifications

Transition Networks CPSMC0800-100 is a versatile and robust media converter designed to enhance network connectivity in industrial environments. This device is particularly well-suited for users looking to improve the performance and reliability of their communication systems. With its ability to convert between different media types, the CPSMC0800-100 presents a myriad of applications for enterprise networks, security systems, and other critical infrastructures.

One of the standout features of the CPSMC0800-100 is its support for multiple media types. It seamlessly converts Ethernet signals between copper and fiber optics, allowing for flexible integration with existing network infrastructures. This capability is essential for organizations looking to extend their network reach, especially over long distances, without compromising on signal integrity.

The CPSMC0800-100 operates at speeds of up to 1 Gbps, making it suitable for high-performance applications. This speed is complemented by its low latency, ensuring that data is transmitted quickly and reliably. This is particularly important in environments where real-time data transmission is crucial, such as surveillance systems and industrial control networks.

Another key characteristic of this media converter is its robust design, optimized for harsh environmental conditions. With an extended temperature range, the CPSMC0800-100 can operate in temperatures ranging from -40°C to 75°C. This durability ensures that the device can function effectively in various settings, including factories, outdoor installations, and remote locations.

The CPSMC0800-100 is also equipped with advanced features such as IEEE 802.3az Energy Efficient Ethernet support. This technology helps lower power consumption, which is a significant consideration for organizations looking to reduce operational costs while maintaining network performance. Additionally, it has built-in LEDs for monitoring link activity and power status, enabling easy troubleshooting and maintenance.

Installation and configuration of the CPSMC0800-100 are made simple through its compact design and plug-and-play functionality. The device can be easily mounted in various locations, ensuring that deployment is quick and hassle-free. Overall, Transition Networks' CPSMC0800-100 media converter stands out as a reliable and effective solution for organizations aiming to enhance their network infrastructure with flexibility, speed, and durability. Whether for expanding existing networks or adapting to new technologies, this media converter is a valuable asset in modern communications.
Top Page Image Contents