Transition Networks CPSMC0800-100, CPSMC0810-100 manual Grounding Lugs

Page 18

CPSMC08xx-100 PointSystem™ Chassis

4.1.3Grounding Lugs

The CPSMC08xx-100 comes equipped with grounding lugs, which are provided for a grounding conductor wire terminated with a two-hole,compression-type, grounding connector. The grounding wire -- which must be a copper conductor -- is not included with the chassis and must be provided by the customer/installer.

The electrical conducting path from the chassis must:

•Flow via the grounding lugs to the Common Bonding Network (CBN) for telecom installations; or to an alternate approved grounding system (if required) for non-telecom installations,

•Be of sufficiently low impedance to conduct fault currents likely to be imposed on the chassis, and

•Enable proper operation of any over-current protection devices.

The two-hole, compression-type, grounding connector must be fastened to the grounding lugs with the enclosed, anti-rotationstar-washers and lug-nut fasteners. The required torque to the fasteners is specified by the connector’s manufacturer.

Grounding lugs

(6-32, 1/8" diam.)

 

Two-hole, compression-type

3/4-inch

grounding connector (not included)

 

spacing

Star washer (included)

 

 

Lug nuts (included)

12 AWG copper wire (not included)

chassis

To properly ground the CPSMC08xx-100 chassis:

1.Obtain one (1) properly-terminated, grounding conductor (12 AWG copper wire gauge or larger) with a two-hole, compression-type, grounding connector. Note the manufacturer's applied torque that is required for the connector.

2.Attach the grounding conductor to the chassis by placing the two-hole, compression-type connector onto the grounding lugs and fasten with appropriate lock-washers and lug-nuts at the proper torque.

3.Attach the opposite end of the properly-terminated grounding conductor to the Common Bonding Network (CBN) for telecom installations, or to an approved grounding system (if required) for non-telecom installations.

Grounding Lugs

Grounding Wire with a

 

 

 

CBN (for telecom installation)

 

 

 

two-hole, compression-type

 

 

or Earth Ground

grounding connector

 

 

 

24 hour Technical Support: 1-800-260-1312-- International: 00-1-952-941-7600

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Revision B Compliance Information CPSMC08xx-100 PointSystem ChassisTable of Contents Introduction DescriptionUnpacking the CPSMC08xx-100 Equipment IntroductionMedia Converter Slide-in-Modules Chassis Face Plates Calculating the Power ConsumptionSlide-in-Modules Slide-in-modulesInstalling the Media Converter Slide-in-Modules CFETF110Replacing the Media Converter Slide-in-Modules Three Types of Management Modules Management ModulesSlide-in ModulesInstalling the Management Modules 1a. CPSMM-200 Dual-Slot Master Management ModuleReplacing the Management Modules Powering the CPSMC08xx-100 Primary Power Supply 3.1.1 AC Power SupplyPower supply DC Power Supply AC and DC Power Supplies Auxiliary Power SupplyAC Auxiliary Power Supply Instant Fail Over ProtectionDC Auxiliary Power Supply Standard 19-inch Rack Installation Installing the CPSMC08xx-100 ChassisTable-Top Installation CPSMC08xx-100 ChassisChassis Grounding Lugs Cascade Option Chassis Connecting the Slide-in-Modules to the Network OperationNetwork Management Hardware ConnectionsNetwork mgmt CPSMC08xx-100 PointSystem Chassis DB-9 Serial Port RJ-45 Ethernet PortTroubleshooting YESTechnical Specifications AC Power SupplyCable Specifications Null Modem CableRJ-45 Cable Coax Cable Cable Shield GroundingTransition Now Web-Based Seminars Mail Contact UsTechnical Support AddressWarranty Limited Lifetime WarrantyCPSMC08xx-100 PointSystem Chassis
Related manuals
Manual 26 pages 56.08 Kb

CPSMC0810-100, CPSMC0800-100 specifications

Transition Networks CPSMC0800-100 is a versatile and robust media converter designed to enhance network connectivity in industrial environments. This device is particularly well-suited for users looking to improve the performance and reliability of their communication systems. With its ability to convert between different media types, the CPSMC0800-100 presents a myriad of applications for enterprise networks, security systems, and other critical infrastructures.

One of the standout features of the CPSMC0800-100 is its support for multiple media types. It seamlessly converts Ethernet signals between copper and fiber optics, allowing for flexible integration with existing network infrastructures. This capability is essential for organizations looking to extend their network reach, especially over long distances, without compromising on signal integrity.

The CPSMC0800-100 operates at speeds of up to 1 Gbps, making it suitable for high-performance applications. This speed is complemented by its low latency, ensuring that data is transmitted quickly and reliably. This is particularly important in environments where real-time data transmission is crucial, such as surveillance systems and industrial control networks.

Another key characteristic of this media converter is its robust design, optimized for harsh environmental conditions. With an extended temperature range, the CPSMC0800-100 can operate in temperatures ranging from -40°C to 75°C. This durability ensures that the device can function effectively in various settings, including factories, outdoor installations, and remote locations.

The CPSMC0800-100 is also equipped with advanced features such as IEEE 802.3az Energy Efficient Ethernet support. This technology helps lower power consumption, which is a significant consideration for organizations looking to reduce operational costs while maintaining network performance. Additionally, it has built-in LEDs for monitoring link activity and power status, enabling easy troubleshooting and maintenance.

Installation and configuration of the CPSMC0800-100 are made simple through its compact design and plug-and-play functionality. The device can be easily mounted in various locations, ensuring that deployment is quick and hassle-free. Overall, Transition Networks' CPSMC0800-100 media converter stands out as a reliable and effective solution for organizations aiming to enhance their network infrastructure with flexibility, speed, and durability. Whether for expanding existing networks or adapting to new technologies, this media converter is a valuable asset in modern communications.
Top Page Image Contents