IBM 5.5 manual Netcool/Precision TN command line options

Table A1: Properties in the precisiontn.xml file (3 of 3)

Netcool/Precision TN	Property and Syntax	Description
Component
TopoMediatorExtens	lumos.leapx.servi	Specifies whether Netcool/Precision TN
ion	ce.topo.	should use CLLI codes in NE names to attempt
Netcool/Precision TN	mediator.UseCLLI	to automatically place NEs in the correct state
	Codes	and city groups in a Topology view. The
Topology property.
	truefalse	default is true.
LEAPFramework	lumos.leape.nort	Determines whether TL1 clients must log in to
Netcool/Precision TN	h.tl1.LoginMode	Netcool/Precision TN. If set to NONE, no login
		message (ACT-USER) is required and users are
TL1 Northbound	NONEGATEWAY
		notified of alarms and can issue TL1
property.
		commands as soon as they connect to
		Netcool/Precision TN.
		If GATEWAY is specified then Netcool/Precision
		TN acts as a Gateway NE and TL1 clients are
		required to log in. In the TID field of the
		ACT-USER message, specify the
		Netcool/Precision TN name, or leave the TID
		blank. In the user name and password fields,
		specify a valid Netcool/Precision TN user
		name and password. Any valid user name and
		password will grant full access to
		Netcool/Precision TN and all TL1 commands
		to all NEs.
		The default is NONE.

Netcool/Precision TN command line options

Table A2 describes the precisiontn command line options.

Table A2: Command line options (1 of 2)

Command Line Option	Description
-extcomma-separated	Loads a comma-separated list of jar, zip, and Java class files.
string
-exthelp	Prints this message and exits (same as -help).
-help	Prints this message and exits.
-notrace	Turns trace off. Trace is enabled by default.
-verbose	Turns verbose mode on. Verbose mode is disabled by default.
-bsize integer	This is the pool size for TL1 Messages. The default is 8192.

Appendix A. Reference 67