IBM 5.5 manual Polling CWM topological connections, Polling CWM SubNetwork Connections SNCs

Polling CWM topological connections

To configure a polling schedule for CWM TC polling, follow the steps below:

1.Start the Network Pilot.

2.Select Actions ->Polling ->Manage Network Connection Discovery from the menu.

3.Click the New TC Schedule... button.

4.Enter the name of the new polling schedule and then select

CWMInformixTopoConnSA.

Note: If no CWM NEs have been discovered, CWMInformixTopoConnSA will be unavailable for selection.

5.Click the ->button.

6.Click the Apply button to add the new CWM TC polling schedule.

Polling CWM SubNetwork Connections (SNCs)

To configure a polling schedule for CWM SNC polling, follow the steps below:

1.Start the Network Pilot.

2.Select Actions ->Polling ->Manage Network Connection Discovery from the menu.

3.Click the New SNC Schedule... button.

4.Enter the name of the new polling schedule and then select

CWMInformixSNCConnSA.

Note: If no CWM NEs have been discovered, CWMInformixSNCConnSA will be unavailable for selection.

5.Click the ->button.

6.Click the Apply button to add the new CWM SNC polling schedule.

56 Netcool/Precision for Transmission Networks 5.5 Administration Guide