IBM VT470, VT676, VT670, VT575 manual Turning off the Projector, After Use, To turn off the projector

3. Projecting an Image (Basic Operation)

￿Turning off the Projector

To turn off the projector:

First, press the POWER (ON/STAND BY) button on the projector cabinet or the POWER OFF button on the re- mote control. The “Power Off / Are you sure?” message will appear.

Secondly, press the ENTER button or press the POWER (ON/STAND BY) or the POWER OFF button again.

The power indicator will glow orange. After the projector turns off, the cooling fans keep operating for 30 seconds (Cooling-off time).

Immediately after turning on the projector and displaying an image, you cannot turn off the projector for 60 sec- onds.

Finally, turn off the Main Power switch. The power indica- tor will go out.

LAMP
STATUS
POWER	VIDEO	S-VIDEO COMPUTER-1 COMPUTER-2

SELECT

ON/STAND BY

AUTO

ADJ.

OFF	ON
	POWER
MAGNIFY PIC-MUTE PAGE
	UP
	DOWN
MENU
ENTER	EXIT
L-CLICK	R-CLICK
Power On	Fan running	Standby
LAMP	LAMP	LAMP
STATUS	STATUS	STATUS
POWER	POWER	POWER
Steady green light	Blinking	Steady orange
	orange light	light

CAUTION

Do not unplug the power cable from the wall outlet or do not turn off the main power under any one of the following circumstances. Doing so can cause damage to the projector:

• While the Hour Glass icon appears.

• While the cooling fans are running. (The cooling fans continue to work for 30 seconds after the projector is turned off)

￿After Use

Preparation: Make sure that the projector is turned off.

1.Unplug the power cable.

2.Disconnect any other cables.

3.Retract adjustable tilt feet if extended.

4.Cover the lens with the lens cap.

5.Put the projector and its accessories in the supplied soft carrying case.

29