IBM VT47 Using On-Screen Menu User Adjust when using User, Selecting Base Setting Base Setting

5. Using On-Screen Menu

NOTE: When “sRGB”, “Graphic”, “Video” or “Movie” is selected, the brightness decreases slightly when compared to “Presenta- tion”. This is not a malfunction.

User Adjust (when using User)

When selecting user adjustable presetting (User), the submenu will be displayed.

You can customize each gamma or color. To do so, first select “User” and press the ENTER button, and then proceed the following steps.

Selecting Base Setting [Base Setting]

This feature allows you to use white balance or gamma values as reference data to optimize for various types of images. You can select one of the following five settings.

• Presentation	• Video
• Movie	• Graphic
• sRGB

Selecting Gamma Correction Mode [Gamma Correction]

Each mode is recommended for :

Dynamic	Creates a high-contrast picture
Black Detail	Emphasizes detail in dark areas of the picture
Natural	Natural reproduction of the picture

Adjusting White Balance [Brightness RGB/Contrast RGB]

This allows you to adjust the white balance. Brightness for each color (RGB) is used to adjust the black level of the screen; Contrast for each color (RGB) to adjust the white level of the screen.

Adjusting Brightness, Contrast, Sharpness, Color and Hue

Brightness	Adjusts the brightness level or the back raster intensity.
Contrast	Adjusts the intensity of the image according to the incoming signal.
Sharpness	Controls the detail of the image for Video.
Color	Increases or decreases the color saturation level (not valid for RGB).
Hue	Varies the color level from +/– green to +/– blue. The red level is used as reference. This adjustment is only
	valid for Video and Component inputs (not valid for RGB).

38