Fujitsu RE19-1 DE, RE17-1 DE, A17-2 Transport, Power cable, Energy Star Guidelines, CE marking

Page 12

Transport

Transport the monitor with care and only in its original packaging or another corresponding packaging fit to protect it against knocks and jolts.

Never drop the LCD monitor (danger of glass breakage).

Power cable

To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set.

The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements.

The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath.

For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used. For devices which sit on the floor, only SJT type cable sets may be used.

The cable set must be selected according to the rated current for your device.

If necessary, replace the original power cable with a regular grounded 3-core mains lead.

Energy Star Guidelines

The Fujitsu Siemens LCD colour monitor is designed to conserve electricity by dropping to less than 1 W when it goes into standby, suspend and OFF mode. With this new power management the monitor qualifies for the U.S.

Environmental Protection Agency's (EPA) Energy Star Computers award.

The EPA estimates that computer equipment uses 5 % percent of all business electricity and that this is growing rapidly. If all desktop computers and peripherals enter a low-power mode when not in use, the overall savings in electricity could amount to $ 2 thousand million annually. These savings could also prevent the emission of 20 million tons of carbon dioxide into the atmosphere - the equivalent of 5 million automobiles.

As an Energy Star Partner, Fujitsu Siemens Computers GmbH has determined that this product meets the Energy Star guidelines for energy efficiency.

CE marking

The shipped version of this device complies with the requirements of the EEC directives 89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low voltage directive".

4

A26361-K1063-Z121-1-7619, edition 1

Image 12
Contents Monitor Are there Page Published by Scenicview Operating ManualPage Contents Page Introduction Target groupAdditional information Safety notes Important notesNotational conventions Cleaning Power cable TransportEnergy Star Guidelines CE markingFCC Class B Compliance Statement Declaration of ConformityChecking the contents of the consignment Installing an ergonomic video workstation Mounting and removing the monitor base Mounting monitor baseRemoving monitor base Connecting the monitor Connecting cables to the monitorConnecting cables to the computer Adjusting rake Switching the monitor on/offOperation of the monitor Stage Power-Saving Mode Changing the monitor settings Performing auto-adjustment of the monitorAdjusting background lighting Adjusting the volumeMonitor settings using the OSD menu Adjusting the brightness and contrast Adjusting size and positionSetting colour temperature and colours Setting display of the OSD menuSetting advanced options Activating the factory settingsExiting the OSD menu White Troubleshooting Having this problem? Check the following pointsHaving this problem? Check the following points Permanently unlit or lit pixels Technical data Preset operating modes VESA-DDC-compatible VGA interfacePin assignment D-SUB Monitor port DVI-DPin Meaning