Environmental conditions |
|
Environment class 3K2, IEC 721 |
|
Rated range of operation: | 15 °C .... 35 °C |
Humidity: | 20 % .... 85 % |
Limit range of operation: | 5 °C .... 35 °C |
Humidity: | 20 % .... 85 % |
Condensation must be avoided. |
|
VESA-DDC-compatible VGA interface
Your monitor is equipped with a
i | If the monitor is not yet displayed in the list of monitors, you can select the following |
monitor instead: |
Fujitsu Siemens 4311 FA, 4312 FA,
Preset operating modes
The picture position and size have been set to optimum values at the factory for the i operating modes listed above. Depending on the screen controller used, it may be
necessary to adjust the display position and size. In this case, you can change and save the settings (see "Operation of the monitor").
The following are the most frequently used of the preset operating modes:
Horizontal frequency | Refresh rate | Screen resolution |
|
|
|
31.5 kHz | 70 Hz | 720 x 400 |
31.5 kHz | 60 Hz | 640 x 480 |
37.5 kHz | 75 Hz | 640 x 480 |
37.9 kHz | 60 Hz | 800 x 600 |
46.9 kHz | 75 Hz | 800 x 600 |
48.4 kHz | 60 Hz | 1024 x 768 |
60.0 kHz | 75 Hz | 1024 x 768 |
64.0 kHz | 60 Hz | 1280 x 1024 |
79.9 kHz | 75 Hz | 1280 x 1024 |
|
|
|
For ergonomic reasons, a screen resolution of 1280 x 1024 pixels is recommended. Because of the technology used (active matrix) an LCD monitor provides a totally
24 |