Operation of the monitor
The monitor offers the following possibilities that enable it to be optimally adjusted for the respective user and the respective situation.
Adjusting rake
The rake of the monitor can be adjusted by
►Grasp the monitor with both hands on the right and left edge of the casing and adjust it to the desired rake.
Switching the monitor on/off
1 = Buttons for the OSD menu
2 = ON/OFF switch
3 = Power indicator
The ON/OFF switch (2) is used for switching the monitor on and off.
The power indicator (1) lights up blue when the monitor and computer are switched on. The power indicator lights up orange when the monitor does not receive a video signal or is in the energy saving mode. The power indicator goes off when the monitor is switched off.
When you switch the computer system on, you must proceed in the following order:
►First switch on the LCD monitor with the ON/OFF switch (2).
►Then switch on the computer.
i | If your computer has a power management function |
read the "Notes on power management" section in this chapter. |
12 |