Fujitsu FTP-632MCL002, FTP-632MCL003, FTP-632MCL004 manual Designation, General Specifications

FTP-632MCL001/002/303/304

■DESIGNATION

	Item	Part number
Printer mechanism	Standard	FTP-632MCL001/002*1
Printer mechanism with cutter		FTP-632MCL303/304*1
Interface board	Parallel (Centronics Standard)	FTP-622DCL001/011*2
	Serial (RS232C)	FTP-622DSL001/011/012*3
LSI(MCU)		FTP-622CU101*4
Cables	Thermal head cable	FTP-622Y001
	Parallel interface cable	FTP-622Y201
	Serial interface cable	FTP-622Y301
	Power cable	FTP-622Y401

*1: 001/303 is for front paper insertion (curl path) and 002/304 is for rear paper insertion (straight path).

*2: 001/011 supports ANK and 101 supports ANK + Kanji.

*3: 001/011/012 supports ANK and 111 supports ANK + Kanji.

*4: CU101 supports Kanji and cutter control.

■GENERAL SPECIFICATIONS

Item Specifications

Part number FTP-632MCL001/002

FTP-632MCL303/304

Printing method		Thermal-sensitive line dot method
Dot structure		576 dots/line
Dot pitch (Horizontal)		0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)		0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area		72 mm
Paper width	MCL001/303	80 mm
	MCL002/304	85 mm
Paper thickness		60~100 μm*1	60~100 μm*1
Cutter type		---	full or partial
Number of columns		48 columns/line (24×12 dot font)
Maximum printing speed		640 dotlines/s (80 mm/s)
Character types		Alphanumeric KANA: 159	International characters: 195
		JIS KANJI (FTP-622DCL101/111): approximately 6800
Character composition, dimensions (H×W),		24 × 12 dots, (3.0 × 1.5 mm), 48 columns
Number of characters		24 × 24 dots, (3.0 × 3.0 mm), 24 columns
		16 × 8 dots, (2.0 × 1.0 mm), 72 columns
		16 × 16 dots, (2.0 × 2.0 mm), 36 columns
			(Continued)

2