FTP-632MCL001/002/303/304
(Continued)
| Item |
| Specifications | |
|
| |||
|
|
|
|
|
Part number |
|
| ||
|
|
|
|
|
Interface |
|
| Centronics (ESC/POSTM), RS232C |
|
|
|
|
|
|
|
|
| 24 VDC ± 5%, Voltage |
|
|
|
| Current : average*2 ( ): Peak |
|
| For head |
| 1.11 (1.45) A (at 80 mm/s printing speed, 25% printing ratio) | |
|
|
| 0.81 (1.45) A (at 50 mm/s printing speed, 25% printing ratio) | |
Power supply |
|
| 0.75 (0.87) A (at 30 mm/s printing speed, 25% printing ratio) | |
|
|
|
| |
For motor |
| 24 VDC ± 5%, 1.0 A maximum |
| |
|
|
| ||
|
|
|
|
|
| For cutter |
| 24 VDC ± 5%, 1.0 A maximum | |
|
|
|
|
|
| For logic |
| 5 VDC ± 5%, 0.5 A maximum |
|
|
|
|
|
|
Dimensions | Mechanism |
| 108 (W) × 48 (D) × 20 (H) mm (Excluding lever) | 117 (W) × 57 (D) × 38 (H) mm |
|
|
|
|
|
| Interface board |
| 131 (W) × 89 (D) × 24 (H) mm |
|
|
|
|
|
|
Weight |
|
| approximately 94 g | approximately 330 g |
|
|
|
|
|
Expected life | Mechanism |
| Pulse durability : 1 × 108 pulse/dot (using Fujitsu's standard driving | |
| method) |
| ||
|
|
|
| |
|
|
| Wear resistance : 50 km (at 25% printing ratio) | |
|
|
|
|
|
| Cutter |
| 500,000 cuts | |
|
|
|
|
|
Environmental | Operating temperature |
| 0 to +50°C*3 |
|
conditions |
|
|
|
|
Operating humidity |
| 20 to 85% RH (no condensation) |
| |
|
|
| ||
|
|
|
|
|
| Storage temperature |
|
| |
|
|
|
|
|
| Storage humidity |
| 5 to 95% RH (no condensation) |
|
|
|
|
|
|
| Head temperature |
| By thermistor (applied energy control, abnormal temperature detection) | |
|
|
|
|
|
Detection | Paper out/Mark detect |
| By photointerrupter |
|
|
|
|
|
|
|
| By microswitch |
| |
|
|
|
|
|
Recommended thermal sensitive paper |
| For front insertion use (80 mm width) | : | |
| For rear insertion use (85 mm width) | : | ||
|
|
| ||
|
|
| *Recommended papers |
|
|
|
| · Oji Paper | : PD150R, PD160R, PD170R |
|
|
| · NIPPON Paper | : |
|
|
| · MITSUBISHI Paper Mills | : |
|
|
|
|
|
*1: There may be exceptions.
*2: 24 VDC, minimum head resistance.
*3: Guarantee: +5°C ~+40°C.
3