Fujitsu C-6591 Fields, Options and Defaults for the Security Menu, Main Advanced, Power Boot

							S e c u r i t y M e n u
			PhoenixBIOS Setup Utility
	Main	Advanced	Security	Power	Boot	Info	Exit
	Supervisor Password Is:			Clear			Item Specific Help
	User Password Is:			Clear		Press [Enter] key to
	Set Supervisor Password			[Enter]		set Supervisor Password
	Set User Password			[Enter]		to enable any password
	Minimum User Password Length:			[0]		features.
	Password on Boot:			[Disabled]		Then password entry is
	Password on Resume:			[Disabled]		required to enter BIOS
	Boot from Removable Media:			[All]		Setup.
	Floppy Disk Access:			[All]
▲	Hard Disk Security
▲	Owner Information
	Hard Disk Boot Sector:			[Normal]

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/SpaceChange Values Enter Select ▲Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 14. Security Menu

Table 14: Fields, Options and Defaults for the Security Menu

Menu Field	Options	Default	Description
Supervisor	–—	Clear	A display-only field. Set is displayed when the system supervisor
Password is:			password is set and Clear when it is not.
User Password is:	–—	Clear	A display-only field. Set is displayed when the general user
			password is set, and Clear when it is not.
Set Supervisor	–—	[Enter]	Sets, changes or cancels the Supervisor Password. The Supervisor
Password			Password may be up to seven characters long and must include
			only letters or numbers (no symbols). Passwords are NOT case-
			sensitive. To cancel a password press the Enter key instead of
			entering characters in the Enter New Password field and in the
			Re-enter New Password field. When a Supervisor Password is set
			it must be used to access the BIOS setup utility.
Set User Password	–—	[Enter]	This field can only be accessed if the Supervisor Password is set.
			This field sets, changes or cancels the User Password. The User
			Password may be up to seven characters long and must include
			only letters or numbers (no symbols). Passwords are NOT case-
			sensitive. To cancel a password press the Enter key instead of
			entering characters in the Enter New Password field and in the Re-
			enter New Password field. When a User Password is set it must be
			used to access the BIOS setup utility.
Minimum User	–—	[0]
Password Length:

25