Menu navigation
ENGLISH
- 37
Settings
Menu navigationNavigating through the menu
■Operating procedure
Press
1) Press the <MENU> button on the remote
control or in the controls of the projector.
zThe main menu is displayed.
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
COLOR TEMPERATURE
SHARPNESS
DYNAMIC IRIS
WAVEFORM MONITOR
SPLIT ADJUST
ADVANCED MENU
PICTURE MEMORY
NORMAL
SIMPLE
ON
0
0
0
0
0
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
2) Press the ▲▼ buttons to select main
menu items.
zSelect the item to be adjusted from the 6 items
[PICTURE], [POSITION], [LANGUAGE], [3D
SETTINGS], [LENS CONTROL] and [OPTION].
The selected item is indicated with a yellow cursor,
and the submenu is displayed on the right hand
side.
H-POSITION
V-POSITION
ASPECT
WSS
OVER SCAN
KEYSTONE
16:9
ON
0
0
0
0
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
3) Press the <ENTER> button.
zThe submenu is displayed, and submenu items
become selectable.
4) Press the ▲▼ buttons to select the
submenu item you wish to alter, then
press the
▲
▼
to switch settings/adjust.
zFor items where the setting is switched or that have
a bar scale, the menu screen disappears and only
the selected item (individual adjustment screen) is
displayed, as shown in the diagram below.
H-POSITION 0
zFor items that are only names, pressing the
<ENTER> button displays the next screen and
advanced settings can be performed.
Note
zPressing the <RETURN> or <MENU> button when the
menu screen is displayed returns to the previous screen.
zDepending on the signal input, some items may not be
adjustable and some functions may not be usable.
zSome items can be adjusted even if a signal is not input.
zSee page 38 for the submenu items.
zWhen a 3D image is being displayed, the “3D icon” can
be seen at the top left of the menu screen.
0
0
0
0
0
3D
■Returning adjusted values to default
settings
Press the <DEFAULT> button on the remote control
to return the settings/adjustment values to default
settings.
Press
This function differs depending on the screen displayed.
●When the submenu screen is displayed:
The submenu items displayed are returned to
their default settings.
●When individual adjustment screen is displayed:
Only the item currently being adjusted is returned
to its default settings.
H-POSITION 0
Note
zAll settings cannot be simultaneously returned to default
settings.
zSome items do not return to default settings even you
press the <DEFAULT> button. Please set those items
individually.
zThe vertical bar above the bar scale on the individual
adjustment screen indicates the default setting.
The position of the vertical bar varies depending on the
input signal.
0