[LENS CONTROL] menu
ENGLISH
- 73
Settings
Select [LENS CONTROL] from the main menu of
“Navigating through the menu” ( page 37), and
choose an item from the submenu.
zAfter selecting an item, adjust the screen position
using the ▲▼◄ ► buttons.
Remote control Projector controls
Note
zDuring the display of 3D images, you cannot use
[AUTO SWITCHING], [LEFT MASKING AREA], [RIGHT
MASKING AREA], [UPPER MASKING AREA], [LOWER
MASKING AREA].

[ZOOM/FOCUS]

[ZOOM/FOCUS] test pattern 1 is displayed.
Adjust so that the pattern size and focus are correct.
zDuring the display of 3D images, a pattern that can
conrm the stereoscopic effect is displayed.
zDuring the display of 3D images, Test pattern 2 is not
displayed.
PATTERN CHANGE
RETURN
FOCUS ZOOM
Test pattern 1

1) Press the ◄► buttons to adjust the

[ZOOM] and ▲▼ to adjust the [FOCUS].

2) Press the <ENTER> button.
zTest pattern 2 is displayed.
Recheck the focus.
Press the <ENTER> button once more to switch to
the input video, and press it once again to return to
test pattern 1.
PATTERN CHANGE
RETURN
FOCUS ZOOM
Test pattern 2

3) Press the <RETURN> button or <MENU>

button.
zThis returns you to the [LENS CONTROL] menu.
Note
zThe [ZOOM/FOCUS] test pattern displayed on last use is
displayed rst.
zIf the projector or the screen is angled, the top and
bottom edges of the image will become out of focus.
Align the focus to the center of the screen.
zIf keystone distortion occurs, adjust [KEYSTONE] from
the [POSITION] menu.
( page 63)
zFor details of how to control the lens with the remote
control, see “Managing the lens control settings” in
“Remote control operation”.
( page 32)

[LENS MEMORY LOAD]

You can recall saved zoom/focus adjustment
positions, horizontal video position, vertical video
position, mask amount adjustment values, or aspect
ratio settings.
LENS MEMORY LOAD
LENS MEMORY1
LENS MEMORY2
LENS MEMORY3
LENS MEMORY4
LENS MEMORY5
LENS MEMORY6
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION

1) Press the ▲▼ buttons to select the

memory name to be recalled.

2) Press the <ENTER> button.
zThe video adjustments for the recalled memory are
switched to.
Note
zThis lens memory function is not 100% guaranteed to
reproduce adjustments.
zIf the power is switched off during [LENS MEMORY
LOAD], when the power is switched back on may be in
the state before the power was switched off. In this case,
readjust the zoom and focus.
zIf a setting is not saved using [LENS MEMORY SAVE]
or all memories are deleted using [LENS MEMORY
DELETE] in the [LENS MEMORY EDIT] menu, the [LENS
MEMORY LOAD] menu will not be displayed.
[LENS CONTROL] menu