[OPTION] menu
ENGLISH
- 77
Settings
[OPTION] menu
Select [OPTION] from the main menu of
“Navigating through the menu” ( page 37),
and choose an item from the submenu.
zSelect item and use the ◄ ► buttons to switch the
settings.
Remote control Projector controls

[ON-SCREEN DISPLAY]

This enables setup related to on-screen display.
Press the <ENTER> button.
zThe [ON-SCREEN DISPLAY] menu is displayed.
ON-SCREEN DISPLAY
INPUT GUIDE
OSD DESIGN
OSD POSITION
DETAILED
TYPE1
CENTER
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION

■[INPUT GUIDE]

Set the display method for the currently selected input port
name. This is displayed in the top right of the screen when
the <INPUT SELECT> button is pressed. ( page 34)
Switch settings Switch settings
[DETAILED] Display the input terminal
graphically
[OFF] Turn off the guidance
[SIMPLE] Display the name of input
terminal only

■[OSD DESIGN]

Set the color of the on-screen menu.
Switch settings Switch settings
[TYPE1] Display using normal design
[TYPE2] Display using black and white
design

■[OSD POSITION]

You can change the displaying position of the on-screen
menu.
Switch settings Switch settings
[CENTER] Display in the center of the
projection screen
[LOWER LEFT] Display in the bottom left
of the projection screen
[LOWER CENTER]
Display in the bottom
center of the projection
screen
[LOWER RIGHT] Display in the bottom right
of the projection screen
[UPPER LEFT] Display in the upper left of
the projection screen
[UPPER CENTER] Display in the upper center
of the projection screen
[UPPER RIGHT] Display in the upper right
of the projection screen

[BACK COLOR]

Set the color of the projection screen when no signal
is input.
Switch settings Switch settings
[BLUE] Display the whole projection
screen blue
[BLACK] Display the whole projection
screen black