Panasonic PTAE8000U, PT-AE8000U 3D Motion Remaster, 3D Safety Precautions, Switch settings Active

[3D SETTINGS] menu

The gauge display of the one-dimensional display on the parallax adjustment monitor of [Mode2] or [Mode3] indicates the following content:

Note

zzIn [Mode2] and [Mode3], the display position can be moved left and right with the ◄ ► buttons.

Blue gauge

Red gauge

Triangular

point

Displays the maximum value of the into screen parallax

Displays the maximum value of the in front of screen parallax

Displays the peak of the parallax of the entire image during the last one second (left side: In front of screen parallax, right side: Into screen parallax)

zzIn [Mode3], the detection level of the parallax can be changed with the <SUB MENU> button. Low level and high level can be switched by pressing the button each time. The default setting is high level.

zzIn the cases such as 3D video input has a very large parallax or in dark scenes, the correct parallax may not be detected. zzIf the depth of field effects in front of and into the screen

for the 3D video parallax are set stronger than the target, this may cause some individuals to feel extreme discomfort or fatigue. Adjust the parallax so as to not exceed target displaying (white (solid line)).

zzWhen an action is performed such as switching the power off and on, switching input, or switching the signal, the parallax adjustment set becomes inactive.

zzWhen adjusting the parallax using the [3D VIEWING MONITOR], the ends on both sides of the video are masked. Also note that the aspect size is changed.

Settings

MOVE DISPLAY

ADJUST ENTER : APPLY DEFAULT : RESET FUNCTION : FREEZE

This indicates the maximum estimate into screen parallax while measuring.

Reference	Peak of the
line	into screen
Peak of the in	parallax
front of screen
parallax

This indicates the maximum estimate

in front of screen parallax while measuring.

*The illustration shown here depicts how an image is projected.

The parallax distribution display on the parallax adjustment monitor in [Mode3] indicates the following content:

Blue display Displays the into screen parallax

Red display Displays the in front of screen parallax

MOVE DISPLAY SUB MENU : CHANGE SENSITIVITY HIGH SENSITIVITY

ADJUST ENTER : APPLY DEFAULT : RESET FUNCTION : FREEZE

* The illustration shown here depicts how an image is projected.

ADJUST ENTER : APPLY DEFAULT : RESET FUNCTION : CANCEL FREEZE

*The illustration shown here depicts how an image is projected.

zzThe [3D VIEWING MONITOR] is disabled during keystone correction.

[3D MOTION REMASTER]

During the display of 3D images, a smooth operation in which the continuity of parallax is maintained is realized.

Switch settings	Switch settings
[ON]	Active
[OFF]	Inactive

Note

zzThis function is only active for 3D input signals and is inactive for 3D video that has been converted from 2D to 3D.

zzWhen [FRAME CREATION] is [OFF], [3D MOTION REMASTER] cannot be performed.

[3D SAFETY PRECAUTIONS]

A request message regarding 3D viewing is displayed.

72 - ENGLISH