Panasonic PT-AE8000U, PTAE8000U manual Trigger 1/2 Setting, Output, Input

[TRIGGER 1/2 SETTING]

You can set the function for each trigger terminal. The trigger terminals for this projector are used as both the input/output terminal for the trigger function and the output terminal for the external 3D IR Transmitter (optional accessory). This is selected with a menu.

Attention

zzYou can connect a maximum of two external 3D IR Transmitter (optional accessory).

zzMake sure the <MAIN POWER> switch of the projector is turned <OFF> before a cable is connected to or disconnected from a trigger terminal.

■■[OUTPUT]

In conjunction with projector operation set in the [TRIGGER 1 SETTING]/[TRIGGER 2 SETTING] menu, a trigger output signal is sent to an external device with a trigger terminal to enable control.

■■[INPUT]

Receipt of a trigger input signal from an external device enables control of projector operation setup in the [TRIGGER 1 SETTING]/[TRIGGER 2 SETTING] menu.

1/2

PICTURE	ON-SCREEN DISPLAY
	BACK COLOR	BLUE
POSITION	STARTUP LOGO	ON
	AUTO SEARCH	ON
	HDMI SIGNAL LEVEL	NORMAL
LANGUAGE	FRAME RESPONSE	NORMAL
3D SETTINGS	PROJECTION METHOD	FRONT/DESK
	TRIGGER 1 SETTING	OFF
	TRIGGER 2 SETTING	OFF
LENS CONTROL	SLEEP	OFF
	HIGH ALTITUDE MODE	OFF
OPTION	LAMP POWER	NORMAL
	FUNCTION BUTTON
	VIERA LINK SETTINGS

1)Use the ▲▼ buttons to select [TRIGGER 1 SETTING] or [TRIGGER 2 SETTING] and

press the <ENTER> button.

zzThe [TRIGGER SETTING] menu is displayed.

PICTURE	TRIGGER 1 SETTING
	OFF	3D SHUTTER OUT
POSITION	OUTPUT
	POWER ON	SELECT 4:3 ASPECT
	SELECT LENS MEMORY 1	SELECT 16:9 ASPECT
LANGUAGE	SELECT LENS MEMORY 2	SELECT S16:9 ASPECT
3D SETTINGS	SELECT LENS MEMORY 3	SELECT JUST ASPECT
	SELECT LENS MEMORY 4	SELECT ZOOM ASPECT
	SELECT LENS MEMORY 5	SELECT H-FIT ASPECT
LENS CONTROL	SELECT LENS MEMORY 6	SELECT V-FIT ASPECT
	BLANK	RS-232C COMMAND LINK
OPTION	DELAY TIME	0 SEC.
	INPUT
	POWER ON/OFF	BLANK

[OPTION] menu

2)Press the ▲▼◄► buttons to select the input/output function and press the <ENTER> button.

zzFunction settings

	Unable to transmit the
	trigger output signal. Does
	not function even if trigger
	input signal is received.
[OFF]	(Trigger input signal can
	be received.)
	An external 3D IR
	Transmitter (optional
	accessory) will not
	operate even if
	connected.
[3D SHUTTER	Select this for connecting
	and use of an external 3D
OUT]	IR Transmitter (optional
	accessory).

Note

zzRead the operating instructions for the external 3D IR Transmitter (optional accessory) when using a 3D IR Transmitter.

zzOutput

[POWER ON]	[SELECT 4:3
	ASPECT]
[SELECT LENS	[SELECT 16:9
MEMORY 1]	ASPECT]
[SELECT LENS	[SELECT S16:9
MEMORY 2]	ASPECT]
[SELECT LENS	[SELECT JUST
MEMORY 3]	ASPECT]
[SELECT LENS	[SELECT ZOOM
MEMORY 4]	ASPECT]
[SELECT LENS	[SELECT H-FIT
MEMORY 5]	ASPECT]
[SELECT LENS	[SELECT V-FIT
MEMORY 6]	ASPECT]
[BLANK]	[RS-232C COMMAND
	LINK]

When the item which is set in the [TRIGGER

1 SETTING]/[TRIGGER 2 SETTING] menu is chosen or executed in the projector, 12 V is output from a trigger terminal.

Note

zzWhen [AUTO] is selected in the [ASPECT] menu of [POSITION], video is automatically displayed using either 4:3 or 16:9 aspect ratio depending on the input signal, so if this aspect ratio matches the settings made in [TRIGGER 1 SETTINGS] or [TRIGGER 2 SETTINGS] 12 V is output.

Settings

ENGLISH - 79