[PICTURE] menu
52 -
ENGLISH
Settings
■[COLOR MANAGEMENT]
For the selected [PICTURE MODE], you can adjust a
selected color individually with [CURSOR] mode or adjust
the six color components (Red, Green, Blue, Cyan,
Magenta, Yellow) with [RGBCMY] mode.
Adjustment results can be saved as a prole and called
later.

●Create a new prole

Note
zWhen the input signal is switched while adjusting,
adjustment details are not saved.
zIf there is another area, which has the exact same or
similar color as the target on the same screen, these
colors will be adjusted as well.
zYou can adjust all colors except white, gray and black.
zIf you edit a single color to be individual different colors,
the desired color may not be achieved.
zWhen you execute [COLOR MANAGEMENT] while a
3D image is being displayed, only the left eye image is
displayed.

zAdjusting the selected color (when

[CURSOR] is selected for [ADJUSTMENT

MODE])

Select the desired color with a cursor and adjust.
1) Press the ◄► buttons to select [CURSOR]
in [ADJUSTMENT MODE].
COLOR MANAGEMENT
PROFILE
ADJUSTMENT MODE
START ADJUSTMENT
LOG
NORMAL
CURSOR
2) Press the ▲▼ buttons to select [START
ADJUSTMENT] and press the <ENTER>
button.
zThe cross cursor (A) is displayed, and the
projected image is captured.
Screen
3) Move the cursor with the ▲▼◄► buttons
to the required place to select a color.
zAlign the center of the cross cursor on the point
in the projected image to be adjusted.
4) Press the <ENTER> button.
z[CURSOR] menu (B) and the color selected (C)
are displayed.
COLOR
TINT
BRIGHTNESS
CURSOR
0
0
0
RETURN
DEFAULT
SELECT
ENTER
Screen
Note
zIn some cases you may be unable to adjust when the
very edge point of the projection area is selected.
zYou can create a prole only when [ADJUSTMENT
MODE] is set to either [CURSOR] or [RGBCMY]. A prole
cannot be created from both adjustments.
zWhite, gray and black cannot be edited.
5) Press the ▲▼ buttons to select a menu
item and the ◄► buttons to adjust each
item level.
[COLOR]
Adjust the vividness of the
color.
zSetting range:
−30 to +30
[TINT] Adjust the color tone.
zSetting range:
−30 to +30
[BRIGHTNESS]
Adjust the brightness of the
color.
zSetting range:
−20 to +20
zThe default setting for each item is [0].
After adjusting, the post-adjustment color (D) is
displayed.
COLOR
TINT
BRIGHTNESS
CURSOR
RETURN
DEFAULT
SELECT
ENTER
0
0
0
Screen
6) Press the <ENTER> button.
z[PROCESSING] message is displayed for a few
seconds and the result is stored in [LOG].
You can store up to 8 logs under [LOG]. Press
the <RETURN> or <MENU> button to return
to the previous menu. Repeat from step 3) to
store more adjustments.
7) Press the <RETURN> button or <MENU>
button twice.
zThis returns you to the [COLOR
MANAGEMENT] menu.