Technical information
ENGLISH
- 103
Appendix
■Cable specications

(When connected to a personal computer)

■Control commands

Commands available when controlling this projector from a computer are as follows.

<Operation commands>

Command
Control contents Remarks
PON POWER ON In standby mode, all commands other than the PON command are ignored.
The PON command is ignored during lamp on control.

zIf a PON command is received while the cooling fan is operating after the lamp has

switched off, the lamp is not turned back on unless approximately 85 seconds have

passed in order to protect the lamp.

POF POWER OFF
IIS SWITCH
INPUT
Parameters
CP1 = COMPONENT IN SVD = S-VIDEO IN
VID = VIDEO IN HD1 = HDMI 1 IN HD2 = HDMI 2 IN HD3 = HDMI 3 IN
RG1 = COMPUTER IN
OMN MENU Displays the main menu.
OEN ENTER Activates the selected items in the menu mode.
OBK RETURN Returns to the previous menu or escaping from the menu mode.
OCU
OCD
OCL
OCR
Navigation buttons
(▲▼◄►)
OCU = ▲ cursor OCD = ▼ cursor
OCL = ◄ cursor OCR = ► cursor
OLE LENS Displays the test patterns for adjusting [ZOOM/FOCUS].
([RETURN] or [MENU] when nishing)
OST DEFAULT Resets to the factory default setting. ( page 33)
OFZ FREEZE Freezes the projected screen. ( page 83)
0 = OFF, 1 = ON
FC1 FUNCTION BUTTON Activates the function allocated to the <FUNCTION> button of the remote control.
OSH BLANK
Turns off the projection temporarily.
Sends the command to switch between ON and OFF. ( page 83)
Do not rapidly switch between ON/OFF.
While the BLANK function is ON, it is switched OFF when any command is received.
OVM PICTURE Activates the [PICTURE] menu. Send the command to switch menu items.
( page 40)
OMM MEMORY LOAD Displays the [MEMORY LOAD] menu.
OWM WAVEFORM
Parameter
0 = OFF 1 = FULL SCAN(Y) 2 = FULL SCAN(R) 3 = FULL SCAN(G)
4 = FULL SCAN(B) 5 = SINGLE LINE SCAN(Y) 6 = SINGLE LINE SCAN(R)
7 = SINGLE LINE SCAN(G) 8 = SINGLE LINE SCAN(B)
VS1 ASPECT Switches the aspect ratio. Aspect ratio is switched each time this command is sent.
( page 61)
VPM PICTURE MODE
Switches the [PICTURE MODE]. ( page 40)
Parameter
NOR = NORMAL DYN = DYNAMIC 709 = REC709 DCN = D-CINEMA
CN1 = CINEMA1 CN2 = CINEMA2 GM1 = GAME
DPA PICTURE ADJUST Displays the individual adjustment screen of the [PICTURE] menu operated immediately before
this operation.
DCM COLOR
MANAGEMENT Displays the [COLOR MANAGEMENT] menu.
OVL VIERA LINK Displays the [VIERA LINK] menu.
OSM SUB MENU
Displays the SUB MENU of the connected equipment, when [VIERA LINK SETTING] - [VIERA
LINK] is [ON], and the "VIERA Link" compatible device and CEC-compatible equipment of other
manufacturers is connected. For details on the CEC-compatible equipment of other manufacturers,
see page 97.
1
2
3
4
5
6
7
8
9
NC
NC
NC
NC
NC
NC
NC
NC
1
2
3
4
5
6
7
8
9
Projector PC (DTE)