Panasonic PT-AE8000U, PTAE8000U manual Point, Input, Output

	Display the currently selected
	point number. The number is in
POINT	the order of 1 to 15 starting from
	the lower input level. The selected
	point flashes in yellow on the
	adjustment screen.
	Display the input level of the
	currently selected point. Can
	be set in the range of 1 to 99%
	in increments of 1%. When
INPUT	dispatching from the factory, the
	input level is set in the order of
	5%, 10%, 15%, 20%, 25%, 30%,
	35%, 40%, 45%, 50%, 60%, 70%,
	80%, 90%, and 95% starting from
	point 1.
	Display the output level of the
	currently selected point. The
OUTPUT	difference from the standard value
	can be set in the range of -252
	to +252. The adjustable range
	depends on the input level. The
	standard value is 0.

6)Change the POINT, adjust the INPUT level, and also adjust the OUTPUT level.

zzIn the screen displayed in 5), select any one from [Y], [R], [G], or [B], and then perform the operation after pressing the <ENTER> button.

The respective operations are described below.

a. Changing the point to be adjusted

zzPress the ◄► buttons to move the cursor for selecting the point, to the left or right.

Press the ► button to move one point to the right. Press the ◄ button to move one point to the left.

Y R G B

[PICTURE] menu

b. Adjusting the input level (only [Y])

zzPress the <SUB MENU> button to set the [OPERATION MODE] to [INPUT ADJUSTMENT]. See the operation guide to check if the current status is the [CHANGE POINT] mode or the [INPUT ADJUSTMENT] mode.

Operation Guide

CHANNEL	RESET
CHANGE	(RESET ALL: 3 sec)	CHANGE POINT
	OUTPUT ADJ.
OPERATION MODE	RETURN
	SET AS NEW REF.
CHANNEL	RESET
CHANGE	(RESET ALL: 3 sec)	INPUT ADJ.
	OUTPUT ADJ.
OPERATION MODE	RETURN
	SET AS NEW REF.

zzIf you press the ◄► buttons, you can adjust the input level of the currently selected point.

The input level can be set in the range of 1 to 99% in increments of 1%. However, you cannot set an input level more than that of the adjoining points.

Note

zzThe input level can be adjusted only when [Y] is being adjusted.

The input level cannot be adjusted when [R], [G], or [B] are being adjusted.

Ex: When the ◄ button is pressed on [Y].

Y R G B

0%		50%			100%
	POINT 8		INPUT 40%	OUTPUT	0

Settings

Move left

0%			50%		100%
	POINT		INPUT		OUTPUT
		8		40%		-16

0%		50%		100%
POINT		INPUT		OUTPUT
	8		37%		+8

ENGLISH - 47