3.2 Turning the Power Off
Make sure that all the work for the day is completed before turning off the power. If the unit is on, take the following steps to shut it off.
1.Shut down the software. This should turn off the unit.
Turning the power off while the software is operating may corrupt the programs and data on the disc.
2.If the unit is still powered up after you have shut down the software, take the following steps:
3.Slide up the power switch cover which is located on the left side of the monitor.
4.Press the power switch to power down the computer.
NOTE: When the power has been disconnected, wait at least five seconds before turning it back on.
Turning the power off while the software is operating may corrupt the programs and data on the hard disk.
Follow the software prompts when turning off the power.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY, AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU’S PRIOR WRITTEN CONSENT.
Chapter 3 - Basic Operations | TeamPoS 7000 User Guide |
20 - Turning the Power Off | TeamPoS7000_User Guide_D900000454.pdf |