4.1.2 Cleaning the magnetic card reader (option)
The read head of the magnetic card reader can become severely soiled with use. If you continue to use a magnetic card reader with a dirty read head, the reader may fail to read data correctly. Clean the read head at regular intervals (about once every two months).
Use a cleaning card to clean the head. Using the same procedure as that for reading a magnetic card, slide the cleaning card through the reader four to five times for each side. Note that the magnetic card reader is optional.
NOTE: Use of the Fujitsu cleaning card (Product number
4.1.3 Cleaning the printer
Clean the printer at regular intervals (roughly about once every six months). If not kept clean, paper debris and dust are likely to accumulate, which may degrade the print quality and/or cause paper jams.
To clean the printer, remove the printer head cover (see “Cleaning the print head and roller”). and remove any debris in the printer.
Do not touch the print head immediately after printing. Allow it to cool before attempting to clean it.
4.1.4 Cleaning the print head and roller
Use a wet cloth with alcohol (ethyl alcohol) or a light cleaning solution which is squeezed tightly, or just use a dry cloth. Do not allow any liquids to enter the device in order to prevent damage occurring to the device when you use cleaning liquid and do not use volatile materials such as thinner or benzene because such materials may cause corrosion or remove color from the frame.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY, AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU’S PRIOR WRITTEN CONSENT.
Chapter 4 - Daily Maintenance | TeamPoS 7000 User Guide |
32 - Cleaning the Equipment | TeamPoS7000_User Guide_D900000454.pdf |