1.2.12.1 TeamPoS 7000 Front Panel Switch and LCD Matrix
Button
Button/LED | Position | Comment |
|
|
|
Reset | Between | Resets system; all data in |
switch | LEDs and | memory will be lost. |
| buttons |
|
Volume | Leftmost | Press to decrease speaker |
Down | button | volume. |
Volume | Second | Press to increase speaker volume. |
Up | from left |
|
Brightness | Second | Press to decrease monitor |
Down | from right | brightness. |
Brightness | Rightmost | Press to increase monitor |
Up | button | brightness. |
HDD/SSD | Leftmost | This LED flashes to indicate |
activity | LED | HDD/SSD read/write activity. |
5V Standby | Second | Indicates that AC power is |
(MB power) | from left | supplied to the power supply and |
|
| standby voltages for the |
|
| motherboard are available. |
Unused | Third from | Unused. |
LED | left |
|
Memory | Middle | This LED is illuminated when |
Diagnostic | LED | the BIOS memory test detects a |
|
| memory error. |
Fan | Third from | This LED is illuminated when |
Diagnostic | right | the BIOS detects a fan failure (all |
|
| models except A100). |
HDD2/SSD2 | Second | This LED is illuminated when |
Diagnostic | from right | HDD2/SSD2 is not detected. |
HDD1/SSD1 | Rightmost | This LED is illuminated when |
Diagnostic | LED | HDD1/SSD1 is not detected. |
|
|
|
Caution: It is assumed that the user of this manual fully understands and strictly adheres to proper Electrostatic Discharge (ESD) precautions. Failure to adhere to precautions can cause damage to this equipment.
Always remove the power cord from the unit prior to performing any system maintenance.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY, AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU’S PRIOR WRITTEN CONSENT.
Chapter 1 - Overview | TeamPoS 7000 User Guide |
12 - AIO Peripherals | TeamPoS7000_User Guide_D900000454.pdf |