IBM SAGP-845EV Integrated Peripherals, On-chip VGA, Flash Bios, On-Chip Primary/Secondary PCI IDE

Page 31

On-chip VGA

Enabled/Disabled On-chip VGA

Flash BIOS

Disabled/Enabled Flash BIOS

4.8Integrated Peripherals

CMOS Setup Utility – Copyright © 1984 – 2000 Award Software Integrated Peripherals

On-Chip Primary	PCI IDE			Enabled		Item Help
IDE Primary Master PIO				Auto		________________
IDE Primary Slave	PIO			Auto		Menu Level	¾
IDE Primary Master UDMA			Auto			If your IDE hard drive
IDE Primary Slave	UDMA		Auto			supports block mode select
On-Chip Secondary	PCI IDE		Enabled			Enabled for automatic
IDE Secondary Master		PIO	Auto			detection of the optimal
IDE Secondary Slave		PIO	Auto			number of block read/write
IDE Secondary Master		UDMA	Auto			per sector the drive can
IDE Secondary Slave		UDMA	Auto			support
USB Controller				Enabled
USB 2.0 Controller				Enabled
USB Keyboard Support				Enabled
Onboard Audio Device				Enabled
Init Display First				PCI Slot
IDE HDD Block Mode				Enabled
Power ON Function				BUTTON ONLY
KB Power ON Password			Enter
Hot Key Power ON				Ctrl-F1
Onboard FDC Controller				Enabled
Onboard Serial Port 1				3F8/IRQ4
Onboard Serial Port 2				2F8/IRQ3
UART Mode Select				Normal
UR2 Duplex Mode				Half
Onboard Parallel Port				378/IRQ7
Parallel Port Mode				SPP
ECP Mode Use DMA			3
PWRON After PER-Fail				Off
Watch Dog Timer Unit				Second

↑↓←→ Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit

F1: General Help

F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults

Note: There are some items in bottom of scroll.

On-Chip Primary/Secondary PCI IDE

The integrated peripheral controller contains an IDE interface with support for two IDE channels. Select Enabled to activate each channel separately.

The choice: Enabled, Disabled.

IDE Primary/Secondary Master/Slave PIO

The four IDE PIO (Programmed Input/Output) fields let users set a PIO mode (0-

4)for each of the four IDE devices supported by the onboard IDE interface. Modes 0 through 4 provide successively increased performance. In Auto mode, the system automatically determines the best mode for each device.

The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.

31

Image 31

Contents With 10/100 Ethernet LAN & AGP4X VGA SBC VersionTrademarks Copyright NoticeSupport Table of Contents Introduction Specifications− For alternative applications, a keyboard and a PS/2 Package Contents SAGP-845EV Layout InstallationLayout CPU Voltage Setting Clear Cmos SetupKeyboard Power Selection Compact Flash Card Master/Slave Mode SettingConnection Table of Connectors Label FunctionFDD1 FDC Connector Floppy Disk Drive ConnectorIDE1 Primary IDE Connector Ultra ATA33/66/100 IDE Disk Drive ConnectorIDE2 Secondary IDE Connector Parallel Port LPT1 Parallel Port ConnectorCOM2 10-pin Connector COM1 10-pin ConnectorSerial Ports USB Port Connector Keyboard ConnectorIrDA Infrared Interface Port LAN RJ45 Connector Fan ConnectorVGA Connector Right GND Left Audio ConnectorsCN4 Audio Connector 2x82.00mm CDIN1 CD-IN Connector 1X42.54mm pin headCard DETECT2 Ground Compact Flash Storage Card SocketCFA1 Compact Flash Storage Card Socket Pin Assignment Ground Card DETECT1CN2 Multiple Panel External Switches and IndicatorsPW1 ATX Power Switch Connector PW2 ATX12V Power Connector for CPUIntroduction Award Bios SetupStarting Setup Press DEL to enter SetupMain Menu Using SetupKey Function Advanced Chipset Features Setup ItemsStandard Cmos Features Advanced Bios FeaturesEGA/VGA Standard Cmos SetupMono Main Menu Selections Options DescriptionMM DD Yyyy IDELBA IDE AdaptersOptions Description CHSAdvanced Bios Features Boot Up Floppy Seek Quick Power On Self TestLAN BootROM First/Second/Third/Other Boot DeviceGate A20 Option Boot Up NumLock StatusTypematic Rate Setting Typematic Delay MsecSmall Logo EPA Show Report No FDD For WinCAS Latency Time Advanced Chipset FeaturesAuto Dram Timing SelectableDelay Transaction Dram RAS# to CAS# DelaySystem Bios Cacheable Video Bios CacheableOn-Chip Primary/Secondary PCI IDE Flash BiosIntegrated Peripherals On-chip VGAIDE Primary/Secondary Master/Slave Udma IDE HDD Block ModeUart Mode Select Parallel Port ModeDpms Power Management SetupWatchdog Timer Unit S1POSVideo Off Method Power ManagementSuspend Mode For SL CPU’sPrimary IDE Secondary IDE FDD, COM, LPT Port HDD Power DownIRQ Resources 10 PnP/PCI Configuration SetupReset Configuration Data Resource controlled byVcore PC Health StatusIRQ3/4/5/7/9/10/11/12/14/15 assigned to PCI/VGA Palette SnoopCPU Host / 3V66 / PCI Clock Frequency/Voltage ControlAuto Detect PCI Clk Spread SpectrumDefaults Menu Enter Password Supervisor/User Password SettingPassword Disabled Quit without saving Y/N? Y Exit SelectingSave to Cmos and Exit Y/N? Y Exit Without SavingINT 15H AH 6FH Appendix a Watchdog TimerPage IO Address Map Address Range Description Appendix B Address MappingIRQ Mapping Table 1st MB Memory Address Map Memory address DescriptionDMA Channel Assignments Function Bios Update Procedure Appendix C How to Upgrade a New BiosInstall screen Recovering the previous BiosAppendix D AGP Slot