IBM SAGP-845EV Advanced Chipset Features, Auto, Dram Timing Selectable, CAS Latency Time

4.7Advanced Chipset Features

CMOS Setup Utility – Copyright © 1984 – 2000 Award Software

Advanced Chipset Features

DRAM Timing Selectable			By SPD	Item Help
CAS Latency Time			1.5	_______________________
Active to Precharge Delay		7		Menu Level	¾
DRAM RAS# to CAS# Delay		3
DRAM RAS# Precharge		3
Memory Frequency For			AUTO
System BIOS Cacheable		Enabled
Video BIOS Cacheable			Disabled
Memory Hole At 15M-16M			Disabled
Delayed Transaction			Enabled
AGP Aperture Size			64MB
	** Onboard Display Cache Setting **
	On-chip VGA		Enabled
Flash BIOS			Disabled
↑↓←→Move Enter: Select +/-/PU/PD: Value				F10: Save	ESC: Exit
F1: General Help
F5: Previous Values F6: Fail-safe defaults				F7: Optimized Defaults

This section allows users to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and accesses to system memory resources, such as DRAM and the external cache. It also coordinates communications between the conventional ISA bus and the PCI bus. It must be stated that these items should never need to be altered. The default settings have been chosen because they provide the best operating conditions for the system.

DRAM Timing Selectable

The first chipset settings deal with CPU access to dynamic random access memory (DRAM). The default timings have been carefully chosen and should only be altered if data is being lost. Such a scenario might well occur if the system had mixed speed DRAM chips installed so that greater delays may be required to preserve the integrity of the data held in the slower memory chips.

CAS Latency Time

When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing.

The Choice: 1.5, 2, 2.5, 3.

DRAM Cycle Time Tras/Trc

Select the number of SCLKs for an access cycle.

The choice: 5/7, 6/8.

29