Nortel Networks NN10300-020 manual Assigning a directory entry to a feature key

Using the Assign menu 57

The key type is changed and a check mark appears beside the selection.

7To assign a directory entry to a Local key, see “Assigning a directory entry to a feature key” (page 57).

--End--

Assigning a directory entry to a feature key

Follow this procedure to assign a directory entry to a feature. Assigning a directory entry to a feature key gives you the ability to speed dial that number when you press the key.

Prerequisites

The feature key you select must be defined as Local. See “Defining the key type” (page 56).

Step Action

1From the main menu, open the Feature menu.

A list of the feature keys and their current assignments appears.

2Select the key defined as Local. The Assign menu appears.

3Press Feature.

The directory contact list opens.

4Scroll through the list and select the entry to assign to the feature key.

5Press Ok.

A check mark appears beside that entry in the directory. The number is dialed when you press the key.

--End--

Enabling or disabling autoscroll

If autoscroll is enabled, the IP Phone automatically directs you to the screen for the active feature. For example, if your secondary Directory Number (DN) is configured on screen two, and you receive a call to that number, the feature screens scroll to page two. You can answer the call immediately without searching for the screen.

Follow this procedure to enable or disable the autoscroll feature.

Carrier VoIP

Nortel IP Phone 2007 User Guide (CICM)

NN10300-020 02.03 Standard

7 March 2008

Copyright © 2007, 2008 Nortel Networks