Nortel Networks NN10300-020 manual Using conference call, Call is transferred

40While on an active call

Step Action

1On the screen, touch the key to which the Transfer feature is assigned.

The call is put on hold and a dial tone sounds. On the display, an indicator flashes beside the line on which the call is held.

2Use the dialpad to enter the number to which to transfer the call.

3When that number rings or is answered, touch the transfer key again.

The call is transferred.

4If the call is not answered, press the line key to resume and terminate the call.

--End--

Using conference call

Follow this procedure to engage in a conference call.

The Three Way Call (3WC) feature allows you to add three calls to a conference. If six port conference is available, you can add a maximum of six calls to a conference. If six port conference is available, 6WC appears beside a feature key in the display.

Step Action

1On the screen, touch the key to which the conference call feature is assigned, either 3WC or 6WC.

The call is put on hold and a dial tone sounds. On the display, an indicator flashes beside the line on which the call is held.

2Dial the number of the person you want to add to the call.

At this time, you can talk privately to the person you are adding, to announce the conference.

3Touch the conference key again to merge the calls.

4Repeat steps 2 and 3 to add more calls to the conference.

5If you make a mistake dialing, or a party does not want to be included in the conference, press the extension key of the conference call to reconnect to the conference.

--End--

Carrier VoIP

Nortel IP Phone 2007 User Guide (CICM)

NN10300-020 02.03 Standard

7 March 2008

Copyright © 2007, 2008 Nortel Networks