3-33
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Chapter3 Configuring Devices Using the Templates
Adding a New VLAN
Step 1 To add a new VLAN, enter the following:
Table3-7 Adding a New VLAN Settings
Field Description
VLAN ID Enter the identification number of the VLAN.
Note This setting must match the setting on the switch.
VLAN Name Enter the a unique name for the VLAN configured on the
access point.
VLAN Enable From the list, select one of the following:
•Enabled—Use this setting to enable the VLAN.
•Disabled—Use this setting to disable the VLAN.
Default Priority From the list, select one of the following:
•Background—Use this setting for bulk transfers and
other activities that are allowed on the network but
should not impact network use by other users and
applications.
•Default—Use this setting for normal LAN traffic.
•Excellent Effort—Use this setting for the network’s
most important users.
•Controlled Load—Use this setting for important
business applications that are subject to some form
of admission control.
•Interactive Video—Use this setting for traffic with
less than 100 ms delay.
•Interactive Voice—Use this setting for traffic with
less than 10ms delay.
•Network Control—Use this setting for traffic that
must get through to maintain and support the
network infrastructure.
Default Policy
Group Enter the default policy group number, or select one you
created using Association > Policy Groups.