Chapter 3 Configuring Devices

Using the Templates

Procedure

Step 1 Select 11a Radio > Identification. The 11a Radio: Identification dialog box displays in the right pane.

Step 2 Click see details to see which versions this option is valid for.

Step 3 Enter the following information to identify the port:

Note Clicking Clear removes all the current entries in the window and any entries you have made in other Template windows up until that point.

Table 3-21 11a Radio Identification Settings

 

 

 

Field

Description

 

 

 

 

 

 

 

 

Primary Port?

From the list, select one of the following:

 

 

 

 

Note If the primary port was set using

 

 

 

 

Ethernet > Identification, the

 

 

 

 

selected value is displayed.

 

 

 

 

Ethernet—Sets the Ethernet port for all

 

 

 

 

access points other than AP1200’s as the

 

 

 

 

primary port.

 

 

 

 

Ethernet AP 1200—Sets the Ethernet

 

 

 

 

port for AP1200 access points as the

 

 

 

 

primary port.

 

 

 

 

Radio 11b—Sets the 11b radio port as

 

 

 

 

the primary port.

 

 

 

 

Radio 11a—Sets the 11a radio port as

 

 

 

 

the primary port.

 

 

 

 

 

 

 

 

Adopt Primary Port Identity?

From the list, select one of the following:

 

 

 

 

yes—This adopts the primary port

 

 

 

 

settings (MAC and IP addresses) for the

 

 

 

 

Ethernet port.

 

 

 

 

no—This uses different MAC and IP

 

 

 

 

addresses for the Ethernet port.

 

 

 

 

 

 

 

 

User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine

 

 

3-74

 

 

 

78-14947-01

 

 

 

 

 

Page 128
Image 128
Cisco Systems 1105 manual Primary Port? From the list, select one of the following, Ethernet Identification