Chapter5 Using Reports
Displaying Current Reports
5-32
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01
Step 6 To sort table data, click on the column heading you want to use to sort the data:
•A triangle indicates ascending order.
•An upside-down triangle indicates descending order.
•No triangle indicates that the data is not sorted.
Step 7 To export the report, click Export. (See Exporting a Report, page 5-66.)
Step 8 To email the report, click Email Report. (See Emailing a Report, page 5-66.)
Displaying an AP Ethertype Protocol Filters Report
This device report lists the Ethertype protocol filters configured on th e acc ess
point.
Procedure
Step 1 Select Reports > Current. The window refreshes with a device selector in the left
pane.
Step 2 If you want to search for the device, use the dialog box in the left pane above the
device selector:
a. From the list, select the method you want to use to search for the d evice: by
name or by IP address.
b. Enter the IP address or name, or use an asterisk (*) as a w ildc ard to de note
numbers and letters, then click Search. The requested device appears in the
Search Results folder.
Step 3 From the device selector in the left pane, click to expand the folder and select the
access point for which you want a report. The right pane refreshes.
Step 4 From the Report Name list, select AP Ethertype Protocol Filters.