Cisco Systems 1105 manual Managing Groups, Overview Groups

Chapter 6 Performing Administrative Tasks

Managing Groups

b.Select a server from the Server Name list, and enter data as described in Step 1.

c.Click Submit.

Step 3 To remove an EAP-MD5 server:

a.Select Administration > Discover > EAP-MD5 Server > Remove Server. The RADIUS Server: Remove Server dialog box appears.

b.From the list, select the server you want to remove, then click Submit.

Step 4 For information on changing the polling interval and response time fault thresholds for EAP-MD5 servers, see Specifying Fault Thresholds, page 2-15.

Managing Groups

When you select Administration > Group Management, the device selector appears in the left pane and a group management window appears in the right pane. Initially, only the system-defined groups appear in the device selector. The group management window allows you to create your own groups—see Creating, Editing, and Deleting Groups, page 6-39).

Related Topics

•Overview: Groups, page 6-37

•Creating, Editing, and Deleting Groups, page 6-39

Overview: Groups

The Group Management window allows you to view the existing device groups and categorize devices into named groups so that you can perform management tasks on a group of devices as a single operation.

A group is a named entity that can contain devices, other groups, or a combination of devices and groups. There are two types of groups:

•System-definedgroups—SeeSystem-Defined Groups, page 6-38.

•User-definedgroups—SeeUser-Defined Groups, page 6-39.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		6-37