Cisco Systems 1105 manual Finish to save the template. See Finishing the Template

Chapter 3 Configuring Devices

		Using the Templates
Table 3-9	New Service Set Settings (continued)
Field		Description
Shared		From the list, select one of the following:
		• Yes—Use this option if you use shared and EAP
		authentication to block client devices that are not
		using EAP from authenticating through the access
		point.
		• No—Use this option if you do not use shared and
		EAP authentication.

Default Unicast Address Filter

Open	From the list, select one of the following:
Shared	• Allowed—The access point forwards all traffic
	except packets sent to the MAC addresses set as
Network-EAP
	disallowed with the Address Filters.
	• Disallowed—The access point discards all traffic
	except packets sent to the MAC addresses set as
	allowed with the Address Filters or on your
	authentication server.
	Select Disallowed for each authentication type that
	also uses MAC-based authentication.

Step 2 Click Add to add the Service Set to the Service Sets to Add list.

Step 3 To delete a group from the list, select the name, then click Delete.

Step 4 Select one of the following in the left pane:

•Preview to see your changes before you apply them. (See Previewing the Template, page 3-131.)

•Finish to save the template. (See Finishing the Template, page 3-132.)

•Another template category to configure more options. (See Template Categories, page 3-2.)

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-41