Appendix B Command Reference

Privilege Level 15 Commands

Usage Guidelines

To enable Telnet access to the system for all IP source addresses, use the telnetenable enable command alone. To enable specific IP addresses, use the telnetenable enable command followed by the IP addresses.

Example

This command enables Telnet for all IP source addresses:

telnetenable enable

username

To create a new user account or change an account’s properties, use the username command. Use the no form of the command to remove a user account.

username name password password [privilege {0 15}]

no username name

Syntax Description

name

Name of the user account to create or remove.

password

Specifies a password for the account.

password

The password for the account.

privilege

(Optional) Specifies the account privilege level.

0

Gives the account level 0 privileges. This is the default.

15

Gives the account level 15 privileges.

 

User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine

B-74

78-14947-01

Page 480
Image 480
Cisco Systems 1105 manual Username