Cisco Systems 1105 manual Setting Trap Notification, Before You Begin

Chapter 2 Fault Monitoring

Notification Settings

Related Topics

•Displaying Faults, page 2-1

•Specifying Fault Thresholds, page 2-15

•Notification Settings, page 2-20

Setting Trap Notification

This option allows you to enable the WLSE to send north-bound exception notification to one or more SNMP trap receivers. The exception notification contains information such as device name and IP, fault number, timestamp, exception severity, and a message describing the problem.

The MIB that defines the trap and the varbinds can be found at the following URL: ftp://ftp.cisco.com/pub/mibs/v2/CISCO-DEVICE-EXCEPTION-REPORTING- MIB.my

Before You Begin

Make sure your SNMP trap receiver’s trap receiving daemon is set to the correct port. The default port is set to 162.

Procedure

Step 1 Select Faults > Notification Settings. The Fault Notification Settings dialog box appears.

Step 2 Select the message format for the notification: Plain Text or XML.

Step 3 Complete the following:

	Field		Description
	Trap		Select to enable trap notification.
	Port		Enter the port number if different from the
			default of 162.
	Host		Enter the hostname/IP of the SNMP trap
			receiver to which you want to send SNMP trap
			notification.
	Community		Enter the community string.
		User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01				2-21