Cisco Systems 1105 manual Defining the Ethernet Advanced Settings, Ssid

Chapter 3 Configuring Devices

Using the Templates

Step 3 Complete the following:

Table 3-14 Ethernet Hardware Settings

Field	Description
Loss of	Enter the number of seconds the system must detect loss of
Backbone	backbone connectivity (i.e. loss of Ethernet link and no active
Connectivity #	trunk available on any of the radios) before taking the
of Secs (1-1000)	specified by Loss of Backbone Connectivity Action.
Loss of	From the list, select one of the following:
Backbone	•	No action
Connectivity
	• Switch to repeater mode
Action
	• Shut the radio off
	•	Restrict to SSID
Loss of	Enter an SSID index required if the Loss of Backbone
Backbone	Connectivity Action is set to Restrict to SSID, or select the
Connectivity	SSID from the list.
SSID

Step 4 Select one of the following in the left pane:

•Preview to see your changes before you apply them. (See Previewing the Template, page 3-131.)

•Finish to save the template. (See Finishing the Template, page 3-132.)

•Another template category to configure more options. (See Template Categories, page 3-2.)

Defining the Ethernet Advanced Settings

Use this option to define the settings and operational status of the Ethernet port.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-53