Cisco Systems 1105 manual Run Discovery Now, Specifying Device Credentials

Chapter 6 Performing Administrative Tasks

Using Discovery and Managing Devices

Note Routers and switches that do not have access points attached to them are used when computing CDP distance. However, such devices will not appear in the discovered devices list.

Step 5 If you have not entered community strings that allow the WLSE to access all devices to be discovered, click Enter community strings before running discovery. The SNMP Community dialog box appears. For more information about entering community strings, see Specifying Device Credentials, page 6-6.

Step 6 To schedule discovery, click Modify Schedule. The Modify Discovery Schedule dialog box appears.

•Select the State Date and Start Time from the pulldown lists.

•To repeat discovery at specified intervals, click Enable. Then enter a number in the Every textbox and select the interval from the list.

Step 7 Click Next. The CDP Discovery - Summary dialog box appears.

Step 8 Click Finish to submit your settings or Back to make changes in your settings.

Related Topic

Specifying Device Credentials, page 6-6

Run Discovery Now

This option allows you to run an immediate, one-time discovery.

Note Your login determines whether you can use this option.

Procedure

Step 1 Select Administration > Discover > DISCOVER > Run Discovery Now. The

Run Discovery Now - Seeds dialog box appears.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
6-22	78-14947-01