Cisco Systems 1105 manual Add a new Service Set-SeeAdding a New Service Set, Association VLANs

Chapter 3 Configuring Devices

Using the Templates

Step 3 Using this option you can:

•Add a new Service Set—SeeAdding a New Service Set, page 3-39.

•Delete an exiting Service Set from a device—See Deleting an Existing Service Set, page 3-42.

Adding a New Service Set

Procedure

Step 1 To add a new Service set, enter the following:

Table 3-9 New Service Set Settings

Field	Description
Service Set ID	Enter an identification number for your SSID.
(1-24)
Service Set Name	Enter a unique name for the wireless VLAN.
Maximum Number	Enter a number to limit the maximum number of wireless
of Associations	clients per SSID.
Proxy Mobile IP	From the list, select one of the following:
Enabled	• Yes—This setting allows proxy mobile IP use by all
	stations associated to this access point.
	• No—This setting does not allow proxy mobile IP
	use.
Default VLAN ID	Enter the identification number for a defined VLAN, or
	select one of the VLAN IDs you created using
	Association >VLANs.
Default Policy	Enter the identification number of a defined policy
Group	group, or select one of the policy groups you created
	using Association > Policy Groups.

Accept Authentication Type

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-39