Cisco Systems 1105 manual Maintenance Image Commands, This command removes the user account

Appendix B Command Reference

Maintenance Image Commands

Usage Guidelines

Use the username command to change the properties of a user account. To assign a user CLI privilege level 15, use the username command. You cannot assign CLI privilege level 15 through the Web interface. Use the no form of the command to remove a user account. The default privilege level is 0 if you do not provide the privilege option.

For more information about managing user accounts and privilege levels, refer to Administering Users, page 6-75.

Example

This command creates a user account named user1 with password password1 and privilege level 15:

username user1 password password1 privilege 15

This command removes the user account:

no username user1

Maintenance Image Commands

This section describes the commands that are available when the system is booted from the maintenance image. For more information about the maintenance image, refer to the Installation and Configuration Guide for the Cisco 1105 Wireless LAN Solution Engine.

erase config

This command is identical to the level 15 erase config command. For a description, see the “erase config” section on page B-23.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		B-75