Cisco Systems 1105 Setting Server-Based Security, Use this option to set up server-based security

Chapter 3 Configuring Devices

		Using the Templates
Table 3-28 Local AP /Client Security Settings (continued)
Field	Description
Transmit Key	Click to indicate this is the key you want to use to
	transmit packets. Only one key can be selected at a time.
Encryption Key	Enter the type of encryption key used:
	• For 40-bit WEP keys, enter as 10 hexadecimal digits
		(0-9, a-f, or A-F).
	• For 128-bit WEP keys, enter as 26 hexadecimal
		digits (0-9, a-f, or A-F).
Key Size	From the list, select one of the following:
	•	Not set
	•	40 bit
	•	128 bit

Step 3 Select one of the following in the left pane:

•Preview to see your changes before you apply them. (See Previewing the Template, page 3-131.)

•Finish to save the template. (See Finishing the Template, page 3-132.)

•Another template category to configure more options. (See Template Categories, page 3-2.)

Setting Server-Based Security

Use this option to set up server-based security.

Note Changing this setting may cause the access point to reboot.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-97