Cisco Systems 1105 manual Set as disallowed under Association Address, Filters

Chapter 3 Configuring Devices

	Using the Templates
Table 3-15 Ethernet Advanced Settings (continued)
Field	Description
Maximum Multicast	Use this setting to control the number of multicast
Packets/Second	packets that can pass through the Ethernet port each
	second.
	If you enter 0, the access point passes an unlimited
	number of multicast packets.
	If you enter a number other than 0, the device passes only
	that number of multicast packets per second.
Default Unicast	From the list, select one of the following:
Address Filter	• allowed—The access point forwards all traffic
	except packets sent to MAC addresses that have been
	set as disallowed under Association > Address
	Filters.
	• disallowed—The access point discards all traffic
	except packets sent to the MAC addresses that have
	been set as allowed under Association > Address
	Filters.
Always Unblock	From the list, select one of the following:
Ethernet when STP	From the list, select one of the following:
is disabled
	• Yes—Use this setting to maintain a bridge link when
	STP is disabled
	• No—Use this setting to not maintain a bridge link
	when STP is disabled.
	Click see details to see which versions this setting is
	valid for.
Optimize Ethernet	From the list, select one of the following:
for	• Performance—Allows faster packet forwarding.
	• Statistics Collection—Allows better statistics
	collection.
	Click see details to see which versions this setting is
	valid for.

	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01		3-55