Cisco Systems 1105 Fault Summary-Viewing the Fault, Summary Report, Report-Displaying an EAP

Chapter 5 Using Reports

Displaying Current Reports

Step 2	From the device selector in the left pane, click to expand the folder for the group
	security reports you want to view.
Step 3	From the Report Name list, select Group Security Report.
Step 4	Click View. The group report is displayed with the following headings:
	Table 5-9 Group Security Report
	Column	Description
	AP Name	The name of the device.
		Click to view the following:
		• AP Detailed Report—Displaying a
		Detailed Report, page 5-26.
		• Fault Summary—Viewing the Fault
		Summary Report, page 5-3.
		• EAP Authentication
		Report—Displaying an EAP
		Authentication Report, page 5-30.
	AP IP Address	The IP address of the device.
		Click to open up a browser window to the AP
		Summary Status.
	RF Interface	The radio frequency interface.
	Encryption type	Indicates the type of encryption used: No
		Encryption, Optional, or Full Encryption.
	Length of WEP Key1 through 4	The WEP key length.
	(in bits)
	Authentication Type - Open	Indicates whether any device, regardless of
	System	its WEP keys, can authenticate and attempt to
		associate.
	Authentication Type - Shared	Indicates whether an access point sends a
	Key	query to any device attempting to associate
		with the access point.
	Status (Fault)	Click to view the Fault Summary.
		For more information, see Viewing the Fault
		Summary Report, page 5-3.
	User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14947-01			5-15